A:AnswerHello, When you first install your refrigerator, make sure that the controls are still set to the “mid-settings.” The factory recommended set points are 37°F (3°C) for the refrigerator and 0°F (-18°C) for the freezer. Hopefully this information is beneficial to you. Thank you for your inquiry regarding our KitchenAid appliances!
A:AnswerYou can purchase this filter by clicking on the following link, https://bit.ly/3b3zJdC Hopefully this information is beneficial to you. Thank you for your inquiry regarding our Whirlpool appliances!
A:AnswerHello Hillo, thank you for your review. We sincerely apologize for the concerns with your appliance and would like to look further into this for you. Please feel free to reach out to us directly at 1-800-422-1230, via Facebook https://www.facebook.com/KitchenAid or Twitter @KitchenAidCare. We look forward to speaking with you.
A:AnswerHi Kawdad. The depth is 34 3/4 inches, the height is 69 inches and the width is 35 3/4 inches for this KitchenAid® Refrigerator. You will need to allow ¹⁄₂" of space on each side and the top and also allow 1" of space behind the Refrigerator for proper ventilation. We hope this helps!
A:AnswertGee, hank you for your inquiry. Magnets will work on this model, but we do not recommend leaving them on the surface on the Refrigerator, as they can cause discoloration. Your best bet is to keep them in a container when not needed and only using them when you have paper to act as a buffer against the surface.
A:AnswerHello Tmom! The ice maker should produce approximately seven to nine batches of ice in a 24 hour period and ice bins will hold 3.5-4 lbs of ice.
A:AnswerHello 4boysandagirl! We are terribly sorry to hear about your concern. We would recommend contacting KitchenAid® at 1(800)422-1230. We are available M - F 8 am to 6 pm est. They will be better able to assist you.
A:AnswerHi kitchenreno, To make sure the space you need is large enough we would recommend to review the installation instructions for the appliance to determine the proper location requirements. We hope this helps.
