A:AnswerHello! For model KDFE204KPS the Minimum Height is 33.625" and the Maximum Height is 34.625". Thank you for your inquiry about our KitchenAid appliances.
A:AnswerHello, model KDTE204KPS does not offer a setting for China or Crystal. This model has Tough, Express Wash, Rinse, Normal, and ProWash™. Thank you for your inquiry about our KitchenAid appliances.
A:AnswerHello, the water supply requirements are WATER SUPPLY REQUIREMENTS
■ This dishwasher has a water heating feature and also requires a connection to a hot water supply line.
■ A hot water line with 20 psi to 120 psi (138 kPa to 862 kPa) water pressure can be verified by a licensed plumber.
■ 120°F (49°C) water at dishwasher.
■ 3/8" (0.95 cm) O.D. copper tubing with compression fitting or flexible braided water supply line.
NOTE: 1/2" (1.3 cm) minimum plastic tubing is not recommended.
■ A 90° elbow with 3/4" (0.95 cm) hose connection with rubber washer.
■ Do not solder within 6" (15.2 cm) of the water inlet valve.
■ If installed in new construction, make sure the house water supply lines have been flushed prior to connecting the dishwasher to remove any debris that may exist in the supply line.
NOTE: If replacing an existing dishwasher, it is recommended to install a new water line and drain hose (supplied) with the new dishwasher.
A:AnswerHello, for model KDFE204KPS, we can only recommend following the Owner's Manual for proper installation of this model. Thank you for your inquiry on our KitchenAid appliances.
A:AnswerHello, Yes, the line you are seeing above the door handle on the left side is where the Dishwasher, model KDTE204KPS, will vent. Thank you for your inquiry on our KitchenAid appliances.
