A:AnswerThe Denon AVR-S530BT has a line level Subwoofer output (female RCA Jack). A straignt Male to Male RCA Jack cable is used to connect to the subwoofer. No adapters or converters are needed. Make sure Sterio is selected for Sound Mode. Some of the other Sound Modes shut-off the subwoofer output.
A:AnswerThis is just a standard wired subwoofer. As long as the Bose system has a passive subwoofer output, you should be able to connect the R-100SW using an RCA cable.
A:AnswerIt depends on how much you paid for your Martin Logan speakers and how much you want to spend on a subwoofer. Subwoffers can cost from $150 to over $3000. The more expensive subwoffers come with a calibrated microphone to accoustically tune them to your listening room. After that you tune your receiver (if it has a calibrated microphone) to the room with all speakers operating. A good rule of thumb is to buy a subwoffer that costs at least the price of one of your Martin Logan speakers. My subwoofer cost the price of both sterio speakers (combined) and came with a calibration microphone to tune just the lower frequencies.
A:AnswerI don't believe this subwoofer would work with the klipsch sound bars. From what I've seen, the klipsch sound bars use wireless subwoofers instead of wired ones like this.
A:Answer(1) If all you need is a replacement power cord to fix the issue then refer to the attached Non-Polarized cable for USA 120 VAC available at Best Buy.
(2) If the Chassie Mount 120 VAC Male plug on the speaker back is the issue, refer to the other attachment for various replacements that may work. You will have to open up the speaker box to determine which plug will work and then order it. Note that this will probably void the warranty. If the chassie mount plug is different, perform an internet search for the correct part. Soldering will probably be required to replace the plug.
(3) If this is too much work than bring the speaker to Best Buy Service (Geek Squad) and get a quote.
A:AnswerAs long as the soundbar has a LFE output (usually a RCA cable), then yes. This subwoofer just requires a RCA input, it has an internal amplifier built in.
A:AnswerThe R-100SW is a standard wired subwoofer, and will work with any system that has a "subwoofer pre-out" connection on the back. If your receiver does not have this, then it will not be compatible.
A:AnswerManuals are available online. Normally you would have a receiver that you connect this to that provides surround sound. Basically RCA connector to sub out on receiver. https://f072605def1c9a5ef179-a0bc3fbf1884fc0965506ae2b946e1cd.ssl.cf2.rackcdn.com/product-manuals/Reference-Subwoofers-2018-Manual-v02.pdf
