A:AnswerThis is a basic TV / monitor. It has internal speakers, but No outputs. The input is coax for digital TV antennas as well as an HDMI input. There are no controls on the monitor, the KG remote is used for all control of this set. There are no built in Smart features, you can scan for channels for DTV / cable and the HDMI can be chosen for use with TV signal or PC monitor signal.
A:AnswerThe only input are coax and onecHDMI. There are no outputs such as RCA phono jacks Vito send to VCR. If your modern recorder supports HDMI output you could play to this Tab through the HDMI port, but this HDMI is input only. So the answer for most people is no, you can’t record from this set. There are no component or RCA outputs or inputs
A:AnswerThis is a very easy set to operate. The Coax or HDMI inputs are connected to digital antenna, cable or Roku type streaming source. Channels are selected if using DTV or cable. Input is selected as hdmi or coax .. from then on it’s on/off, volume up & down and channel selection.
There’s no on set control, it’s all through the remote.
A:AnswerNo, it does not tilt on the stand, but it can be mounted on a tilted mount as long as it is compliant with VESA Mount interface 75 x 75mm. ^Daphane
A:AnswerThere are not pre-drilled holes that will allow you to mount the stand. The TV is wall mountable using VESA Mounting pattern 75 x 75 (W x H). ^Daphane
A:AnswerNo it does not. However it does have a HDMI input. I plugged my Amazon Fire TV Stick into that and it works well. It would also work with Roku if you have the separate Roku device.
