“This question is about the rinse aid dispenser adjustment. The dishwasher seems to use the same amount of rinsing fluid whether the adjust lever is positioned all the way to the left or all the way to the right. How can I address this problem?”
Answer This Question
1-1 of 1 Answer
We regret to read that your rinse aid dispenser in your LG - 24" Tall Tub Built-In Dishwasher with Stainless Steel Tub - Black, Model # LDF7774BB does not appear to be working. The most common causes for it not working may be due to hard water or detergent buildup clogging up the dispenser or that the dispenser itself is defective. The detergent dispenser is designed to release detergent into the dishwasher tub during the wash cycles and will typically have two compartments, an unsealed compartment for prewash and a sealed compartment for the main wash cycle. Verify that the dispenser is not simply clogged with caked on detergent and give it a good cleaning if necessary. Also check to make sure that the cover for the dispenser will open easily and is not damaged or broken. he rinse aid cap could be the reason why your dishwasher is not releasing rinse aid. The rinse aid dispensing cap is located on the inner door panel of your dishwasher. The rinse aid cap could be loose and may just need to be refitted, but could also be warped or damaged from the heat of the water in the dishwasher. Remove the cap from the door and inspect it for signs of melting or warping and replace if need be. Check the release mechanism for worn or defective parts and replace if necessary. The dispenser may be operated by either a mechanical devise or by a bi-metal release or wax motor devise. If you need to schedule a repair service, you can contact our Support Center at (800) 243-0000 and have them assist you in making arrangements for one...^IFV
Sorry, there was a problem. Please try again later.