1-1 of 1 Answer
When necessary, the Energy Star® Certified LG Single Unit Front Load LG WashTower™ with Center Control® 5.0 cu. Ft. Washer & 7.4 cu. Ft. Gas Dryer, Model # WKGX301HBA, can be disassembled to move or reinstall it. You would first have to loosen the screws assembled on the stacking bracket on the back of the appliance, then push open the caps on the left and right sides of the control panel on the front of the appliance, loosen the screws under the caps, and pull the control panel forward to remove it, and disconnect the wire harnesses from the washer and the dryer to the control panel. Be sure to unplug the appliance before attempting to disassemble it, and always ground yourself before touching the PCB or wiring. Discharge of static electricity may cause product malfunction. Tuck the wire harnesses to the side to avoid pinching them, then unscrew the second screw from the top of the four screws on the left and right, then lift the dryer and separate it from the washer. When assembling the appliance, proceed in reverse order. Please note that any damage resulting from improper disassembly/assembly or installation of the product is not covered by the product warranty. These instructions can be found on page 31 of the installation manual in the appendix of the owner's manual under 'Disassembly > Disassembling the Washer and Dryer'...^Ivan.
Sorry, there was a problem. Please try again later.
