What amp breaker does this stove require? null

This range requires a single-phase, 3 wire, A.C 120/208 V or 120/240 V 60 Hz electrical system. Use only a 3-conductor or a 4-conductor UL - listed range cord with closed-loop terminals, open-end spade lugs with upturned ends or similar termination. Do not install the power cord without a strain relief. A range cord rated at 40 amps with 120/240 minimum volt range is required. If a 50 amp range cord is used, it should be marked for use with 1 3/8" diameter connection openings. A 3-wire connection is NOT permitted on new construction after January 1, 1996, or in areas where local codes prohibit grounding through the neutral conductor. If you are not sure which connection to use, please check with your local building inspector. ^CP

“What amp breaker does this stove require?”

Asked by Jefferson 7 years ago

Answer This Question

See all questions & answers

LG - 6.3 Cu. Ft. Self-Cleaning Slide-In Electric Range withUltraHeat 3200W Power Burner - Black Stainless Steel-Front_Standard

1-1 of 1 Answer

This range requires a single-phase, 3 wire, A.C 120/208 V or 120/240 V 60 Hz electrical system. Use only a 3-conductor or a 4-conductor UL - listed range cord with closed-loop terminals, open-end spade lugs with upturned ends or similar termination. Do not install the power cord without a strain relief. A range cord rated at 40 amps with 120/240 minimum volt range is required. If a 50 amp range cord is used, it should be marked for use with 1 3/8" diameter connection openings. A 3-wire connection is NOT permitted on new construction after January 1, 1996, or in areas where local codes prohibit grounding through the neutral conductor. If you are not sure which connection to use, please check with your local building inspector. ^CP
Answered by LG Digital Customer Care 7 years ago
Sorry, there was a problem. Please try again later.