1-1 of 1 Answer
Hello there, Jim. We understand your inquiry about wall-mount compatibility between your LG OLED65G5WUA and the G4. Here’s what you need to know: Mounting Pattern & Dimensions Both the G5 (OLED65G5WUA) and the G4 use the standard VESA 300 × 300 mm hole pattern (11.8″ × 11.8″), so any UL-certified 300 × 300 bracket will align with both models. Depth difference: The G5 chassis is 1.0″ deep (without stand), whereas the G4 is approximately 0.9″. This means the hooks on your bracket may sit very slightly closer to the wall on the G5—just enough to note when selecting low-profile mounts. TV dimensions without stand: 56.7″ (W) × 32.5″ (H) × 1.0″ (D) for G5; G4 is similar in width and height but a hair shallower in depth. Hook & Hole Placement The horizontal and vertical center-to-center spacing of the mounting holes is exactly 300 mm on both models. The mounting brackets/hooks attach to the back plate in the same locations; however, due to the G5’s slightly thicker panel, you may need to: Loosen the bracket screws just enough to slide the bracket into the locking hooks. Level the bracket once it’s resting on the hooks before fully tightening to ensure a snug fit. Troubleshooting Step Before final installation, lay the TV face-down on a soft, flat surface, then: Use a tape measure to confirm the 300 mm × 300 mm hole spacing matches your bracket. With the bracket loosely attached, engage the hooks and ensure the TV sits flush; if it feels uneven, slightly adjust the bracket’s vertical position before tightening. https://www.lg.com/us/tvs/lg-oled65g5wua-oled-4k-tv#pdp_specs If you’d like personalized guidance or run into any roadblocks, please send us a private message on social media @LGUSSupport, and our team will be more than happy to explore possible solutions with you. We appreciate your patience and look forward to helping you get your G5 mounted perfectly! —Renzo
Sorry, there was a problem. Please try again later.
