“If the depth of my laundry room is 29" with the doors closed will this be fine for the washer and dryer that are 28.4", it seems like it would be a very tight fit, but don't know if that's acceptable per appliance requirements. Please advise on this”
Answer This Question
1-2 of 2 Answers
I doubt that 29" will be enough. The dryer has the vent at the back and you will need to connect this to the vent to the outside. My connection is a via fairly large diameter tube which runs along the back of the dryer (between the dryer and the rear wall) from the dryer vent outlet to the vent to the outside. This results in the front of my dryer being 34" in front of the rear wall. You will need to evaluate how your set-up would be configured and perhaps discuss this with the store people.
Sorry, there was a problem. Please try again later.It depends upon how you connect the vent output from the dryer to the vent to the outside. In my particular set-up the venting tube runs across the back of the dryer to the outside vent connection and so the dryer needs about 34 inches depth. I doubt that 29" will be enough
Sorry, there was a problem. Please try again later.