“MINIUM CLEARANCE REQUIRED FOR REAR EXHAUST DUCT APPLICATION FOR DLE7100W--AN LG 7.3 CU. ft. 8-Cycle Dryer is ????”

1-2 of 2 Answers

• Mine is about 8” for the vent hose to be curved slightly to connect to the wall opening.

  Answered by CanWeAllGetAlong 6 years ago

  • 

  Helpful (0)Unhelpful (0)

  Report

  Sorry, there was a problem. Please try again later.

• The following spacing dimensions are recommended for this dryer. This dryer has been tested for clearances of 1 inch (2.5 cm) on the sides and rear. Recommended clearances should be considered for the following reasons: • Additional clearances should be considered for ease of installation and servicing. • Additional clearances might be required for wall, door and floor moldings. • Additional clearances should be considered on all sides of the dryer to reduce noise transfer. For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent ventilation openings are acceptable. • Companion appliance spacing should also be considered. ^CP

  Answered by LG Digital Customer Care 6 years ago

  • 

  Helpful (0)Unhelpful (2)

  Report

  Sorry, there was a problem. Please try again later.