“Will the pedestalWDP3W work on this gas dryer DLG3401W and washer WM53400CW? Or do I need a different one?”
Answer This Question
1-2 of 2 Answers
Yes. Old Pedastal: WDP3W. - time to install 2-3h New Design: WDP4_ - time to install 30 min The difference is that the WDP4 is made to be reinstalled on a new product. As soon as you try to take off the old dryer from WDP3_ you will realize why they had to redesign it. It uses foam double sided tape to attach to the dryer without damaging it presumably because the old dryers were not made to receive pedestal. You will have use a chisel and mallet to remove the plates then to reattach, get self-drilling machine screws 8 (10 just in case about $0.15 each), #8 1/2 inch for example. Power drill needed. (use eye protection) It will 'damage' the new dryer so consider buying the upgraded Pedestal if that is important, especially if you want it to match. It's not cheap though. You could remove the foam tape and buy 3M flooring tape after removing the old adhesive but that would be a time consuming process. I estimate with the chisel and goo-gone or vinegar soak it would take 2 hours oif labor (use nitrile gloves). Refer as well to the install instructions for WDP3_ https://www.lg.com/us/support/product/lg-WDP3W.ABWEEUS
Sorry, there was a problem. Please try again later.The LG Laundry Pedestal, Model # WDP3W is designed for compatibility with LG Front Load Washers and Dryers that have a width of 27". The ENERGY STAR® Certified LG 7.4 cu. ft. Ultra Large Capacity Gas Dryer, Model # DLG3401W has a width of 27" and can be installed on the WDP3W. Regrettably, we are not familiar with the WM53400CW Washer. Please chak the model number again for the washer in question...^IFV
Sorry, there was a problem. Please try again later.
