“I bought the 320 with hot water capacity. If I choose not to use hot water, do I have to bother hooking up to my hot water line, under the sink? Would it work the same as the 120, where only cool water shoots up?”
Answer This Question
1-7 of 7 Answers
Yes you can just set up the cold water only.
They offer a cap to plug the hot water line if you opt not to use the hot water line, and would essentially work the same as the 120
Verified Purchase
I am buying another one that I am not going to hook up to the hot water. However, I am going to hook the hot up in line with the cold water line at the toilet and hide the hot water line behind the toilet. The reason is so that there is room temperature water in the winter. That toilet is on an outside wall and it would be pretty darn cold!
You do not have to hook up to the hot water line. There is a cap on the hot water intake on the 320, which you can install and will work with cold water only. That is how I have it setup and works without any problems and shoots up only cold water.
- Verified Purchase
You don’t need to hook it up to hot water, it will work the same
- Verified Purchase
According to the company website’s FAQs, under ‘features,’ on their website, https://www.luxebidet.com/faq/, it is supposed to do this. I copied and pasted the question and answer directly from there: “Can the Neo 250 or 320 work with cold water only?” “Yes. To use our hot water bidets with cold water only, use the provided hot water inlet cap and washer. The cap can be screwed onto the hot water inlet” I hope this helps. Good luck!!!
- Verified Purchase
it would work without hooking up the hot water line. It just wont spray when the level is on the hot water side. It comes with a cap to screw on to the hot water input line.
- Verified Purchase