“What type of tower that will be an ideal choice for this mother board”
Answer This Question
1-6 of 6 Answers
The MPG Z390 GAMING PLUS motherboard should fit within a Mid ATX or Full ATX computer case.
Sorry, there was a problem. Please try again later.I went with the Thermaltake V200 Tempered Glass RGB Edition. Easy case to use I would also recommend NZXT H200 case.
Sorry, there was a problem. Please try again later.I would recommend a Medium to Large range case size for this motherboard due to it being a Full ATX
Sorry, there was a problem. Please try again later.Any ATX case will work, but any of the M-ATX and ITX cases are not big enough for the motherboard.
Sorry, there was a problem. Please try again later.You would need an ATX compatible tower.
Sorry, there was a problem. Please try again later.If you dont have much room I use the ROSEWILL Micro ATX Mini Tower Computer Case, Steel and plastic computer case with 1x 120mm front fan and 1x 80mm rear fan, Front I/O and 2x USB 2.0 (FBM-01). Just be sure to put the MB in before you start mounting the other parts. You can take that board, I5 8400 up and build a monster in a small case. I dont know about other mini towers but it will fit in this one. And if you need access to more USB ports in the front use the WANLONGXIN WLX-525E 5.25 Inch PC Dashboard Media Front Panel Audio, with SATA e-SATA Dual USB 3.0 6 Port USB 2.0 Five-in-one Card Reader (SD/MMC/CF/MS/TF / M2). That will get you 6 - 2.0 USB and 2 - 3.0 usb ports in front. PLUS the ability to read any card out there.
Sorry, there was a problem. Please try again later.