“My DVD function will not work even when the engine is not running because it says that it is illegal to view in the front seat. What can I do?”
Answer This Question
1-1 of 1 Answer
There is a wire that is not connected correctly. This wire goes to your parking break switch. In order for the DVD function to work the stereo needs to receive a signal from the parking brake switch that indicated the parking brake is set. SO....try this. Set parking brake. Turn the ignition on. Insert a DVD. The stereo should ask you to release and reset the parking brake. Once the stereo senses that switch going off and on..the DVD should play. If it does not the wire that goes to the parking brake switch is not connected or is not connected to the correct place. I think that wire is light green. My parking brake is applied using a pedal on the left side floorboard of my truck. There is only 1 wire going to the switch so it was very easy for me to connect it. If your car has a handle you pull up to set the parking brake the switch will most likely be located at the back of the parking brake handle. You may have to remove some of the console to find that wire to that switch. You may have an electronic parking brake installed in your car. If so you can ask one of the technitions at your local dealership for help finding that parking brake switch or find that information in your owners manual.
Sorry, there was a problem. Please try again later.