A:AnswerThe front camera can be, the back is more difficult as the wires have to be tucked under the roof liner. Additional mounting hooks would be helpful if you move it from vehicle to vehicle.
A:AnswerUnless you buy a hardwire kit there is really nothing to install. Comes with double side 3m adhesive, stick it to the windshield and rear window, plug in and done.
A:AnswerI can be wired to run 24/7 or it can be wired to record only when the ignition is on. If it's to run 24/7 you will need a battery battery discharge protection unit to make sure your battery isn't drained to the point that your car won't start. I used the one in the link below.
www.amazon.com/gp/product/B008B8ERIO/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
A:AnswerInitially I used a Sandisk standard high speed card and due to the constant use it failed after a month or so (I had it on 24/7).
I then switched and used a Sandisk High Endurance card and it's been fine since. The High Endurance card is difficult to find in stores but it's easily found online.
A:AnswerIt does not have a built-in GPS logger, but this GPS logger can be used for the V1P 3rd Gen https://www.bestbuy.com/site/rexing-gps-logger-for-rexing-v1-4k-v1p-3rd-gen-v2-v2-pro-v3-basic-dash-cam-black/6409011.p?skuId=6409011
A:AnswerI didn’t hardwire mine. My cigarette plug gives constant power in my truck. I believe the hardwire kit plugs into a fuse spot, you could YouTube it and install yourself or pay someone. Once it gets constant power it will record 24/7 in loop mode; just make sure you have the memory cards to support it. . Hope that helps.
