A:Answerno, that's the 'wrong way' , this device would allow for your switch to goto 2 TVs.
look on your TV, it most likely has 2 inputs... if not i think i know where you could get a better TV that does
;)
A:AnswerI'm not sure about latency, but I have it using just a regular tv. Nothing fancy along side with streamlabs obs and both the tv and streamlabs move in sync with each other. Thats also with me using a capture card as well, which I would expect to have some latency, but I can't tell at the moment just by looking at it. Hope this helps a little.
A:AnswerHi RAndom,
For this Rocketfish™ - 2-Output HDMI Splitter with 4K and HDR Pass-Through - Black, if you use very long length of cables (over 20 ft./6.1 m)it may cause a loss of video signal or downgrade to lower resolution. I highly recommend to use a shorter cable, if possible.
Rocketfish Products
Lisa
https://www.rocketfishproducts.com
A:AnswerHi HDMI,
50 feet is generally considered the maximum reliable length. If you have any questions or concerns, please use the link below to reach us and also you can contact this phone number 800-620-2790 for further assistance.
Rocketfish Products
Nikki
https://www.rocketfishproducts.com/
A:AnswerHi Jason267,
Yes, the procedures you have just mentioned is entirely correct on how to properly connect this Rocketfish™ - 2-Output HDMI Splitter with 4K and HDR Pass-Through - Black to your Roku Express, projector, and Surround Receiver in accordance with the procedures from the manual.
Kind regards,
Lisa
Rocketfish Products
Please visit https://www.rocketfishproducts.com
A:AnswerI am splitting a laptop to 2 tvs. In theory, a PS5 would work the same way. But, the HDMI splitter is used to display on multiple screens. So, depending on what you are trying to do with the PS5 it should work.
A:AnswerNo, you cannot watch different signals with this device. This splitter distributes the same HDMI source signal to two HDMI displays simultaneously.
