Questions & Answers

Q: QuestionCan this be used outdoors?

Asked 1 year ago by Anonymous.

• A:Answer Yes, the Rocketfish™ 4 Output Coaxial Amplifier can be used with both indoor and outdoor VHF/UHF/FM antennas. This makes it versatile for various setups, whether you have an antenna inside your home or mounted outside. If you have any other questions or need immediate support, please let us know.

  Answered 1 year ago by RocketfishCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan this amplifier be connected to a Tablo? How can you connect the amplifier in line between the antenna and the tablo device? Do you just add another piece of coax cable?

Asked 1 year ago by stick.

Q: QuestionI have 3 tv’s and a router connedted to my incoming ca Ble signal. Can I just use This without the ac adapter plugged in?

Asked 1 year ago by Anonymous.

• A:Answer Thank you for your inquiry! No, you will need to use the AC adapter to power the amplifier. The amplifier requires power to function properly and distribute the signal to your TVs and router. Keith | Rocketfish Support https://www.bestbuy.com/site/rocketfish-4-output-coaxial-amplifier-silver/9449135.p?skuId=9449135

  Answered 1 year ago by RocketfishCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan you hook up two antennas with this?

Asked 2 years ago by mikem.

• A:Answer Yes, just couple the antennas with a tee and run 1 cable to the amp.

  Answered 2 years ago by MartySVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDo I add an additional cable when installing this or change it out/replace it with the existing cable wire set up?

Asked 3 years ago by Nini.

• A:Answer I used the power cord that came with this amplifier/splitter. Otherwise, I used the old, but high-quality cables that went to and from my old amplifier/splitter. All work well.

  Answered 2 years ago by IowaBobVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI need to add +5db to mynupstream power level on router, will this product help me?

Asked 3 years ago by Joe.

• A:Answer Hello Joe, This is designed to boost the signal; however, it may not work with your product's configuration. Also, this amplifier is a 4db boost inbound and a loss of 7db return. For more questions and product support you may contact our customer service at 1-(800)-620-2790 Monday to Saturday 8am - 9pm CST. Chelsea Rocketfish Support Please give us a visit at: https://www.bestbuy.com/site/brands/best-buy-brands/pcmcat1596746025285.c?id=pcmcat1596746025285

  Answered 2 years ago by RocketfishCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questionusing with an antenna in the attic. the coax cable from the antenna plugs into the rocketfish imput or out1/pwr1 ?

Asked 3 years ago by needhelp.

• A:Answer Input side there's only one

  Answered 3 years ago by ClarksonVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionHow would Rocketfish RFG1179 work with Fivestar 360' outdoor HD antenna? Also the connections as far as the Antenna and the power source to the Rocketfish adapter distance?

Asked 3 years ago by Bogie.

• A:Answer I have no way to test it but - in my opinion - if you have a weak signal to begin with, this will NOT Improve It. That has been my experience at my home. However, this should keep what signal you have strong to all 4 TV's rather than losing some in an un-amplified splitter. I also expect that the PoE should be good for 50' (rule of thumb).

  Answered 3 years ago by DougJonKVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes it work with AT&T U-Verse? I have pixelation and short picture interruptions AT&T is no help fixing this isue. Thank you

Asked 4 years ago by Marcelo.

• A:Answer I don't think there's any way around interruptions

  Answered 3 years ago by ClarksonVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan the Rocketfish amplifier be mounted outside?

Asked 4 years ago by Anonymous.

• A:Answer Yes it can it has a weather resistant case and will require access to power.

  Answered 4 years ago by 0954

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionIs the rocketfish rf+g1179 like the Motorola bda k1 ra . My modem / router is using to much power on my upload because of the weak signal I was told this would work help that because of the return path ?

Asked 4 years ago by Mike4707.

• A:Answer The return path of RF-G1179 is a passive circuit and does not amplify the signal.

  Answered 4 years ago by RocketfishCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionThe description seems to say that the return signal is boosted also, but the instructions say that the return signal isn’t boosted? If the unit has t one powered by the AC adaptor, is it through as cable type connector attaches at “out1/PWR in”?

Asked 4 years ago by ThatGuy.

• A:Answer The return signal isn't boosted.

  Answered 4 years ago by RocketfishCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDo I need a Winegard Boost Xt as a pre-amp with this Rocketfisk Bidirectional Mini Drop Amp to make it a complete RF distribution center.

Asked 5 years ago by Marv.

• A:Answer If the signal is strong, it does not need a boost. If the signal is weak, the boost will be helpful.

  Answered 5 years ago by RocketfishCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this boost the upstream signal for a cable modem?

Asked 5 years ago by Timm.

• A:Answer It will not boost your signal

  Answered 5 years ago by AnonymousVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat is the polarity and amps that the ac adapter needs to be. will a 12 v 1000ma work?

Asked 5 years ago by art.

• A:Answer 12V/1A, internal diameter 1.35mm, external diameter 3.5mm and length 7mm.

  Answered 5 years ago by RocketfishCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIf I run an unpowered antenna into the input on the rockfish and run a powered antenna into the output/power input, will the three outputs be a balanced combination of the two antenna's signal?

Asked 5 years ago by Mick.

• A:Answer No.

  Answered 5 years ago by RocketfishCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs there a powered t.v. antenna available anywhere, that will accept two inputs? One of our outdoor antennas is great at pulling in some channels, but not others. The other antenna is good with the opposite channels, but not the ones that antenna one gets

Asked 5 years ago by BassMike.

• A:Answer No, this product won't work for you.

  Answered 5 years ago by RocketfishCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionMy antenna is outside on the roof. Is it OK to hook it up and plug it in outside? I will secure it so any connections are not in the snow.

Asked 5 years ago by davyb.

• A:Answer If you use the AC adapter, we would recommend installing it inside.

  Answered 5 years ago by RocketfishCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionMy antenna is mounted on the roof of my house. I have no way to connect the Amplified splitter close to the antenna. What are some other options?

Asked 5 years ago by Help.

• A:Answer You want to keep it as close as possible but it’s more important to mount the amp close to a power source and route the antenna cable to the amp

  Answered 4 years ago by 0954

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)