1-4 of 4 Answers
Thank you for bringing this to our attention. While the actual installed height can vary slightly depending on how much the front leveling legs need to be adjusted, the correct height of the RF220NCTASR is 66-3/4" with the hinges. It's worth noting that the case height is 65-3/8", and Samsung recommends leaving 2" above the case for air circulation. We appreciate your interest in Samsung, Ms. Samsung
Sorry, there was a problem. Please try again later.I have the Samsung Model RF220NCTASR french door stainless, 21.6 cu ft refrigerator..........it was just delivered and I was sweating tacks it might not fit due to different height measurements given in specs. Much to my relief it fit! The exact measured height from floor to top of fridge (without hinges) is 65 3/8 inches. The actual measured height from floor to top of hinge is between 66 3/4 and 67 inches.......the difference is due to leveling. There are leveling feet only in the front......on one side I raised it a bit to level, hence the 67 inch measurement. On the other side I did not, so is 66 3/4. Hope that helps.
Sorry, there was a problem. Please try again later.Hi, our frig measures 66 1/2" from the floor. Not sure why the website says other wise, maybe it has to do with leveling it. I believe it can be adjusted in the front to accommodate a wonky floor.
Sorry, there was a problem. Please try again later.I have the Samsung Model RF220NCTASR french door stainless, 21.6 cu ft refrigerator, it was just delivered. It's installed and leveled. All I can say is I just measured it and am 100 % certain my fridge, as leveled, from floor to top of door and door hinge is 67 inches on one side and 66 3/4 on the other. Being a french door unit, the left door is fixed, but the right door can be adjusted slightly so the door tops visually line up with each other. Also there are leveling feet in the front only that adjust the fridge height up or down slightly for leveling. Sure hope that helps a bit
Sorry, there was a problem. Please try again later.
