“Bladder How do you empty the bladder on the washer out of the small door on front lower left”
Answer This Question
1-2 of 2 Answers
Open the door u will see a black hose, pull that gently off its plastic guide take the white plug off but make sure u keep the hose pointed up because the overflow will start pouring out when the white plug is pulled out. Make sure u have a bucket there to catch the water. After the water stops u can than unscrew the large white cap and clean the lint off of it. Make sure u put the white plug back in the tube nice and tight and replace the door. If u have been using the washer for some time the water that comes out of the hose might have a foul Oder.
Sorry, there was a problem. Please try again later.It's a simple task. Be sure to have a small bucket. Flip down the small door, and pull out the small hose from its holding clip. The plastic plug is threaded, so I recommend turning it counter clockwise to remove it. Then simply let the water drain into the bucket. Then turn the trap on the right counter clockwise and clean out any lint or debris. Make sure you twist the cap back on the hose, because you don't want to lose the seal. Hope this helps.
Sorry, there was a problem. Please try again later.