A:AnswerHello.
Thank you for reaching out regarding your Samsung - 7.5 Cu. Ft. Stackable Gas Dryer with Sensor dry on how to convert to propane gas. Regarding your concern, here are the details you need to consider.
• Use only natural or LP (liquid propane) gases.
• The installation must be conformed with local codes, or in the absence of local codes, with the national
fuel gas code, ANSI Z223.1/NFPA 54, latest revision(for the UNITED STATES), or with the natural gas and
propane installation code, CSA B149.1(for Canada).
• Gas dryers are equipped with a burner vent for use with natural gas. If you plan to use your dryer with
LP (liquid propane) gas, it must be converted for safe and proper performance by a qualified service
technician. (LNG models only)
You must check the burner of your model and use the proper LP Kit accordingly. To check the detail
information of the burner, open the door and check the rating label location on the door frame.
- 20,000 BTU: LPKIT-4/XAA (DC98-04114A)
- 22,000 BTU: LPKIT-3/XAA (DC99-00792A)
• A 1/2” (1.27 cm) gas supply line is recommended and must be reduced to connect to the 3/8” (1 cm) gas
line on your dryer. The National Fuel Gas Code requires that an accessible, approved manual gas shutoff valve be installed within 6” of your dryer.
• Gas dryers installed in residential garages must be raised 18 inches (46 cm) above the floor.
• Additionally, a 1/8” (0.3 cm) N.P.T. (National Pipe Thread) plugged tapping, accessible for test gauge
connection, must be installed immediately upstream of your dryer’s gas supply connection.
• Your dryer must be disconnected from the gas supply pipe system during any pressure testing of the
system.
• Do not reuse old flexible metal gas lines. Flexible gas lines must be designed and certified by the
standard for connectors for Gas Appliances, ANSI Z21.24 • CSA 6.10.
NOTE
• Your dryer uses an automatic ignition system to ignite the burner. There is no constant burning pilot.
• Any pipe joint compound used must be resistant to the action of any liquefied petroleum gas.
• As a courtesy, most local gas utilities will inspect a gas appliance installation.
Here is the link to your user manual for further assistance. Please go to pages 18 to 19.
https://downloadcenter.samsung.com/content/UM/202110/20211022010943373/DV6000_DC68-03381W-04_EN_CFR_MES.pdf
Should you need more assistance, please feel free to get back to us via the following options:
1. Facebook Messenger: http://m.me/samsungsupport
2. Twitter: https://twitter.com/messages/compose?recipient_id=18768513
3. Samsung Community: https://us.community.samsung.com/t5/Samsung-Community/ct-p/us
Thank you for being a valued customer of Samsung. Have a great day.
Reference Ticket Number: 1144306926
^Camille
A:AnswerThanks so much for asking. This model dryer (DVG45T6000P/A3) is a fully gas model. However, all Samsung gas model dryers are able to be converted to run on propane using a compatible conversion kit. ^Jecca
A:AnswerThanks so much for asking, Stacy! You are correct that stacking the units will place the dryer's control panel at the top in a high location. We do currently have a few models available that can connect together and use the washer's control panel to operate both the washer and dryer. You can find these models here: https://bit.ly/3s4fqrz. ^Jecca
A:AnswerThanks so much for asking, Danny! This model does not have the ability to connect to Wi-Fi. Because of this, it is not able to be controlled or monitored by a smart phone the way that our Smart Control models are. However, it does have a Delay End feature that allows you to select the time you want the cycle to start and end. You can read how to use this feature on page 38 of the user manual (https://bit.ly/3lmPsM4). ^Jecca
A:AnswerThanks so much for asking, Paula! Samsung pedestals are not designed to hold the weight of both the washer and the dryer stacked. Because of this, we do not recommend using a pedestal with stacked units. ^Jecca
A:AnswerDear Valued BestBuy Client,
To better assist you with this issue, please contact the BestBuy customer service department at 888 237-8289. Call us any time 24 hours a day.
They can either answer your question or transfer you to your local store to answer your specific questions.
^Rainly
A:AnswerHello, the washing machine dimensions are 27" W x 38.7" H x 31.3" D. You can view this information on our website Samsung.com under product specifications. Thank you for choosing Samsung for your laundry needs. ^Lena
A:AnswerHello CharlieDizzle, the width of the dryer is 27" W. The dryer requires 1 in. (25 mm) minimum clearance on the sides. You can view the product dimensions on our website Samsung.com under product specifications. We thank you for choosing Samsung. ^Lena
A:AnswerGreat question, Johnny! The stacking kits are specifically designed to stack a dryer on top of a washer. Because of this, it is likely that the stacking kit would not fit properly on top of a dryer. ^Jecca
A:AnswerGreat question! First, here is a link (https://bit.ly/3nNgg9F) to the user manual for this model. Pages 12-15 have detailed information about the spacing requirements. Specifically page 14 has details about installation under a counter. ^Jecca
A:AnswerThanks so much for asking, theonlyanji! To help combat paper waste, Samsung now provides all of our user manuals online in a downloadable form. Here is a direct link (https://bit.ly/30bQrqG) to the user manual for this model dryer. ^Jecca
A:AnswerI'm so glad you asked! This dryer is able to stack on top of a compatible washer using the stacking kit model SKK-8K. Any washers that are compatible with this stacking kit can be stacked with this dryer. If you would like to leave another question with the model number of the washer you have, I would be happy to look it up and check if it is also compatible. ^Jecca
