“Anyone have an idea , other than a cabinet, how to hide the mass of wires (5) (tv cable, component cables) coming from my floor up to my wall mount TV ?”
Answer This Question
1-2 of 2 Answers
I cut a hole in the wall behind the TV and another behind the wood trim o.n the floor and ran everything down the wall inside also everything plugs into my receiver so I only have 1 hdmi and the plug in running up
Sorry, there was a problem. Please try again later.You can bundle the wires to make one seemingly bigger cable combined with all cables - cut a small hole from the entry of you wall mount behind the TV and another directly under it at the floor level. Feed a piece of cloths hanger tied to a string through the top hole until you see it through the bottom. Make your bottom hole a little larger in order to see it and pull it through. Tie the string to your end connection of your bundle then feed it through. Once you have done that connect the wires to your satellite or cable box receiver and then to your TV. Once done you can the patch your openings to only allow the cables but do not seal it tight so you have to room for any cable and receiver box movement and also if you plan to move it you can safely pull the cables through with out damaging your wall or the openings of the holes you created. It may be timely and labor some but when you're done you will have a TV mounted with zero exposed cables.
Sorry, there was a problem. Please try again later.