“How does one install the Sandisk - 240gb Internal Sata Solid State Drive Plus For Laptops?”
Answer This Question
1-5 of 5 Answers
You should probably do a Google search for replacing the hard drive on your particular make/model of laptop. There are lots of tutorials out there for many different laptops. The generic instructions are: 1. Clone the existing hard drive onto the SSD connected to the computer using a USB adapter. 2. Open the laptop and remove the existing drive. 3. Insert and connect the SSD in the old drive's place. 4. Boot normally. If you don't want to/can't clone the old hard drive's contents to the new SSD, you can do a fresh install of Windows instead, but your data will need to be transferred to the new drive somehow if you want it.
Sorry, there was a problem. Please try again later.Same way as you would install a regular hard drive. You will need to have all necessary disks and drivers so that your laptop can work properly. I try to make a backup of my data so that I can put in the new hard drive. You will need to get instructions on how to properly locate and take out the old hard drive.
Sorry, there was a problem. Please try again later.It is pretty starightforward actually. First you need to ensure you have cloned your original hard drive. Next transfer it onto your new SSD. Third, depending on your laptop, it's just a simple matter of removing your HDD and swapping it for your new SSD. You may also want to upgrade your RAM while you re already in there.
Sorry, there was a problem. Please try again later.Remove the existing drive. Install the SSD the exact same way that you would normally replace a standard drive. Load the OS. Prepare to be amazed
Sorry, there was a problem. Please try again later.If replacing an existing drive, you'll need cloning software like EaseUS or similar and to either connect the empty ssd via an external usb case and direct clone old disk -> ssd and then just pull the old/install the sdd when done, or to clone the existing to an image file on big USB stick or network share, and then restore the image file to the SSD after swapping
Sorry, there was a problem. Please try again later.