Questions & Answers

Q: QuestionWhat is the maximum weight this projector mount can hold?

• A:Answer The maximum weight capacity for this mount is 50 pounds.

Q: QuestionDoes this projector mount allow for adjustments to the tilt, swivel, and roll?

• A:Answer Yes, this projector mount allows for convenient adjustable tilt, swivel, and roll.

Q: QuestionWhat is the duration of the manufacturer's warranty on parts and labor for this projector mount?

• A:Answer This projector mount comes with a 5-year warranty on both parts and labor.

Q: QuestionWhere can this projector mount be installed?

• A:Answer This projector mount is designed to be installed on the ceiling.

Q: QuestionWill this mount work with the epson 4010 projector?

Asked 6 years ago by Moviebuff.

• A:Answer Yes, this mount is compatible.

  Answered 6 years ago by CommunityAnswer

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: Questionwill sanus projector mount fit epson 3020 projector

Asked 11 years ago by Anonymous.

• A:Answer It does fit the 3020. The extension arms need to be used, and it is a little difficult to get them to hold in the right place without shifting once they are used. but the extension arms you need are included with the mount and it will work.

  Answered 11 years ago by sadchiefsfan

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill VMPR1S work with Epson 2030? Does it come with any vertical extension too?

Asked 11 years ago by Anonymous.

• A:Answer Good morning, is that the powerlite home cinema 2030? If so yes and it comes with 1 inch and 7 inch drop extensions. Thanks, Ross Sanus

  Answered 11 years ago by SanusStaff

  
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this work for the Epson 5030?Will this work for the Epson 5030? and is there any other hardware needed?

Asked 11 years ago by Anonymous.

• A:Answer Yes it will work with this projector and there is no other hardware that is needed. Everything that you need is in the box.

  Answered 11 years ago by Fst929

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionIs this projector mount compatable with an EPSON 710 projector?When trying to install my EPSON projector to my Sanus ceiting mount which I have successfully used with an inFocus projector as well as an Optoma projector. Why are there 4 "legs" to attach when the majoity of home theatre projectors only have 3 holes to attach legs to?

Asked 13 years ago by Anonymous.

• A:Answer Some projectors have 4 and some have 3 mounting holes, you should be able to just remove one of the legs and it should fit jut fine, you will need to find the right balance point that will work the best.

  Answered 13 years ago by SanusStaff

  
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill the Sanus Universal ceiling mount model VMPR1S work for a Dell 4100MP projector?

Asked 14 years ago by Anonymous.

• A:Answer Yes, this will be compatible. One leg will have to be removed and then the feet rotated to full height so they can swing under the main plate and make the triangle pattern to be attached.

  Answered 14 years ago by SanusStaff

  
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDrop ceilingWill the mount work on a drop ceiling in an office setting?

Asked 15 years ago by ct pv.

• A:Answer Yes, the VMPR1S will work on a drop ceiling.

  Answered 15 years ago by SanusStaff

  
  Helpful (2)Unhelpful (1)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this celing mount work for espon 8100 projectorWill this ceiling mount work for espon 8100 projector

Asked 15 years ago by Anonymous.

• A:Answer Yes, the VMPR1S is compatible with the Espon 8100 projector.

  Answered 15 years ago by SanusStaff

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionWill This work with a Optima HD20 ProjectorI would like to see the specs on this product before I purchase.

Asked 15 years ago by Tony.

• A:Answer Yes, the VMPR1S is compatible with the Optima HD20 projector. Full specs are available at http://www.sanus.com/us/en/products/visionmount/ceiling-mount/VMPR1

  Answered 15 years ago by SanusStaff

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this compatible with the Sony vpl-vw885es projector? And is there only a 7 inch rod provided for height adjustment? Thanks.

Asked 2 years ago by UncleZoo.

• A:Answer Yes this is compatible with that projector. For the height adjustment with what comes in the box you can either do the flush mount or the 7 inch rod. But any other projector mounting rods should be compatible if you need it at a different height.

  Answered 1 year ago by bmull

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat is the max length of the arms? I have holes 14.5 inches apart on my projector

Asked 2 years ago by Spidey.

• A:Answer Hi Spidey, The maximum length of the arms is 18.51 inches so it should work just fine with your projector. Thanks, Nate @ SANUS

  Answered 2 years ago by SanusStaff

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI need to extend more than 7 inches ( which is already given in box) .. is it possible to add additional?

Asked 3 years ago by Chinna.

Q: QuestionCan it fit Epson 3800?

Asked 3 years ago by Sam.

• A:Answer Yes it will work but the way it mounts is not in the directions

  Answered 3 years ago by PhiltrpVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this mount allow you to slide a projector toward and away from the screen? How much will it allow?

Asked 4 years ago by PoorService.

Q: Questionthe lack of information on your site is deplorable. theres no real pics. whats the weight capacity? does it rotate? are there extensions? how far do the mpounting arms extend. its like you guys arent even trying!! well back to amazons site for me then

Asked 4 years ago by Anonymous.