Questions & Answers

Q: QuestionDoes this projector mount come with the required hardware?

• A:Answer No, the hardware is not included with this projector mount.

Q: QuestionDoes this mount allow for adjustments to the roll?

• A:Answer Yes, this mount allows for roll adjustments.

Q: QuestionCan I adjust the level of the projector after it's mounted?

• A:Answer Yes, this mount has leveling adjustments to ensure the projector is perfectly positioned.

Q: QuestionIs this projector mount designed for wall mounting?

• A:Answer This projector mount can be mounted on the wall.

Q: QuestionHow do you use this mount with the Epson Home Cinema 3010?It is stated in a previous response from "Sanus Support" that the VisionMount works with the Epson Home Cinema 3010, so I purchased this mount accordingly. However, I have found that the mounting holes on the projector are wider than the regular arms can reach, so it seems that 4 extension arms would be needed and yet the mount only comes with 2 extension arms. How does one make the VisionMount work with the projector using the only parts included in the box?

Asked 12 years ago by Anonymous.

• A:Answer Please email [email protected] and request two part #8 extender brackets for the VMPR1 with your address and we can send you these parts no charge - Scott

  Answered 12 years ago by SanusStaff

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionWill the mount work with Epson 3010?WIll this work out of the box, or will I need any additional parts to be ordered? I have an epson 3010.

Asked 13 years ago by Anonymous.

• A:Answer If your projector is a Powerlite home cinema 3010 then it should work out of the box with no additional parts needed.

  Answered 13 years ago by SanusStaff

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionI was sold a VP1 Sanus Universal Projector Mount with the Optoma HD20 projector that I bought. I can not see how the three screw config. can work.I have called the support line and was advised that "they do not see that model listed", however the below post states that the SANUS Universal mount will work with the Optoma HD20. Could you please clarify.

Asked 14 years ago by Don.

• A:Answer The VP1 is compatible with this projector but you will need to remove one leg from the main plate so there are three left, adjust the three feet on the remaining three legs to full extension so the legs can swing under the main plate and secure to the mounting holes using the compatible M3 screws provided. Then lock the lock nuts and acorn nuts on the top of the main plate so everything is locked into one place and attach to the ceiling portion as stated in the manual. If you still have further questions please let us know.

  Answered 14 years ago by SanusStaff

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work as a ceiling mount?

Asked 1 year ago by Tina.

• A:Answer Hi Tina, Yes this should work as a ceiling mount. If you have any other questions please reach out to us at [email protected] or call 1-800-359-5520. Thanks, Nate @ SANUS

  Answered 1 year ago by SanusStaff

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questionwill this mount work with the benq th671st

Asked 2 years ago by Anonymous.

Q: Questionwill this mount work with the HT BenQ 5550

Asked 3 years ago by BenQ.

Q: QuestionIS this compatible with JVC NX5 (RS100)?

Asked 4 years ago by Sera.

Q: Questionwill this fit the optoma uhd50x?

Asked 5 years ago by UMMMHELLO.

• A:Answer Hi, Yes this mount should be compatible, your projector is under the 50 lbs weight limit and looks like it should fit on the mount. Thanks, - Haydn @ SANUS

  Answered 5 years ago by SanusStaff

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work with Sony VPL-VW295ES projector. Thanks

Asked 5 years ago by asshahsiin.

• A:Answer Hi, This mount should be compatible with your specific projector. It can hold up to 50 lbs and your projector looks to be well under that. Thanks, - Haydn @ SANUS

  Answered 5 years ago by SanusStaff

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work with an Optoma WU515 - AND- can this be used with a 1.5" extension pole?

Asked 6 years ago by Anonymous.

Q: Questionwill this work with the Sony VPL-VW385ES projector?

Asked 7 years ago by Pete435.

• A:Answer Hello, Yes as long as your projector is under the 50lb weight limit you should be good to go! Kathryn @SANUS

  Answered 7 years ago by SanusStaff

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this Mount work with a Sony VPL-HW45 projector?

Asked 8 years ago by Bone.

• A:Answer Yes, this will work with a Sony VPL-HW45 projector.

  Answered 6 years ago by CommunityAnswer

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work with an Epson Home Cinema 2045 Wireless LCD Projector?

Asked 9 years ago by BCA13.

• A:Answer I used this for a Epson 5040UB projector and the way the pieces are set up to connect its universal so it should fit any projector. It’s like a jigsaw puzzle lining up everything but it works well. I added another stud to the existing one, side by side so that I could connect all the bolts into a stud. The 5040 projector is very large and heavy....but the picture is incredible for not being 4K.

  Answered 7 years ago by KatieVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work with Epson 3020.

Asked 9 years ago by Anonymous.

• A:Answer Good Day, Yes, this projector mount is meant to be universal, but I would still reach out to us @ 800-359-5520 so our awesome Customer Care team can make sure these will work. Thanks, Jake @ SANUS

  Answered 9 years ago by SanusStaff

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan I mount the Epson - EX9200 Pro Wireless WUXGA 3LCD Projector with this?

Asked 9 years ago by PeterM.

• A:Answer Hey Peter, Yes, this mount should work fine with your projector, which we make to be universal. I would give our Customer Care team a ring @ 800-359-5520 and they should be able to help you out. Thanks! Jake @ SANUS

  Answered 9 years ago by SanusStaff

  
  Helpful (0)Unhelpful (0)ReportAnswer this question