“Looking at a Garden series 8.1 outdoor speaker package which includes an Sr2-125 amp and a Sonos Port. Can I run the line out from my ONKYO TX-SR393 receiver to the line in on the Sonos port? I'd like to be able to control outdoor volume from my phone.”
Answer This Question
1-1 of 1 Answer
Yes, you can run the line-out from your ONKYO TX-SR393 receiver to the line-in on the Sonos Port. Here's how you can set it up: Connect the Receiver to the Sonos Port: Use an RCA cable to connect the line-out of your ONKYO TX-SR393 receiver to the line-in on the Sonos Port. This will allow the audio signal from your receiver to be fed into the Sonos system. Configure the Sonos Port: In the Sonos app, go to the settings for the Sonos Port and configure the line-in source. You can adjust the settings to ensure that the audio from your receiver is correctly routed through the Sonos system. Set Up the Sonos Amp and Outdoor Speakers: Connect the Sonos Port to the SR2-125 amp using an appropriate connection method (usually RCA or similar). Then, connect the amp to your outdoor speakers. Control Volume with the Sonos App: With the Sonos Port and amp set up, you should be able to control the volume of the outdoor speakers through the Sonos app on your phone. The app allows you to manage the volume and audio settings for connected speakers. Ensure Proper Configuration: Make sure the Sonos Port is set to handle line-in audio correctly, and verify that the input levels are set appropriately to avoid distortion or low volume issues. By connecting your ONKYO receiver to the Sonos Port and using the Sonos app to control volume, you'll be able to integrate your outdoor speakers into your Sonos system and manage them from your phone.
Sorry, there was a problem. Please try again later.