“Need some help with the possibilities for this receiver to be put together with a speaker system and other devices. Does the watt capacity in this device restrict the possibilities in any way? Can this receiver be combined with both SS-B1000 and SS-CR3000 Speakers at the same time? or would it be better to combine the SS-B1000 with a subwoofer SA-W2500 or HTCT60 at the same time? I intend to make the combination also with the cd changer CDPCE500 and later with the turntable PS-LX300USB connected to the cd changer itself. Can that be done and have an adecuate functioning of the whole equipment?”
Answer This Question
1-2 of 2 Answers
You can connect the SSB1000 to the IN ports of the SAW2500 and connect the OUT ports of the SAW2500 to the speaker A ports of the STRDH130. Connect the CDPCE500 to the SACD/CD IN on the STRDH130 receiver and connect the PSLX300USB to the MD/TAPE IN of the receiver. You have to make sure that the PHONO/LINE switch on your turntable is set to LINE so that sound will be routed on the receiver and would come out of the speakers connected to it.
Sorry, there was a problem. Please try again later.You can only connect a total of 4 speakers (2 A-side + 2 B-side) to this receiver for a dual-stereo config. You are honestly best off using the subwoofer + 2x bookshelf speakers for a 2.1 channel set up. Run the speaker wires from the receiver into the "high level" inputs of the subwoofer, then run the "high level" outputs to your speakers. Tune the crossover and gain of the subwoofer to your liking.
Sorry, there was a problem. Please try again later.