“How many watts does the SonySTR-DN1070 Amplifier have?”
Answer This Question
1-3 of 3 Answers
Hi! This is a 7.2 Ch. 1155W A/V Receiver (165 W x 7 @ 6 ohms, 1 kHz, THD 0.9%). -Anthony
Sorry, there was a problem. Please try again later.Use this conversion formula for converting 6 ohm to 8 ohm power specs (reverse for 8 ohm to 6 ohm): 100 (watts) per channel x 6 (ohms) = 600. 600 ÷ 8 (ohms) = 75 watts per channel min RMS full bandwidth with 8 ohms. See below from STR-DN1070 Operating Instructions: "POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (USA models only) With 6 ohm loads, both channels driven, from 20 Hz – 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output. Amplifier section1) Minimum RMS Output Power (6 ohms, 20 Hz – 20 kHz, THD 0.09%) 100 W + 100 W Stereo Mode Output Power (6 ohms, 1 kHz, THD 1%) 120 W + 120 W Surround Mode Output Power2) (6 ohms, 1 kHz, THD 0.9%) 165 W per channel 1) Measured under the following conditions: 2)Reference power output for front, center, surround, surround back and front high speakers. Depending on the sound field settings and the source, there may be no sound output. Note Area Power requirements USA, Canada 120 V AC, 60 Hz Oceania, Europe 230 V AC, 50 Hz"
Sorry, there was a problem. Please try again later.165 watts per channel. It also has the ability to bi amp your speakers (if they are capable).
Sorry, there was a problem. Please try again later.