“I have connected SonyX800 to TV using an HDMI cable and DAC Creek Ruby using a coaxial cable.I will only get the audio from the amp after disconnecting the HDMI cable.When plug HDMI, the audio output from the coax output is switched off. What Is Wrong?TX”
Answer This Question
1-2 of 2 Answers
It sounds like you have connected audio output from your disc player to your amplifier. I believe this is not ideal. It is preferable to connect the disc player to the TV (as you have done, with an HDMI cable) and the audio output from the TV to the amplifier. Recent SONY TV's are designed to optimally output the audio channels via an optical cable. If your amplifier doesn't have an optical cable input receptacle, you may be able to jury-rig something to make the connection with an optical cable to an adapter with a female optical receptacle and a male output that fits an audio input on your amplifier. Once you have determined which female inputs are on your amplifier (in addition to coax), you can ask the Geek Squad whether such an adapter exists. If you can make such a connection, make sure you adjust the tv's controls to disable sound through the tv's speakers, because such sound will not be in phase with the sound output via the amplifier.
Sorry, there was a problem. Please try again later.Hi Radim, please check the audio settings of your BluRay player. Please refer to pg.22 of the link below. Try changing the [Digital Audio Output] to [PCM]. Thanks! ^Ron https://docs.sony.com/release//Manual_4687309111.pdf
Sorry, there was a problem. Please try again later.