1-4 of 4 Answers
you have to run 12 volts to each camera, the supplied cables already have the power cable together with the coax cable, they also supply the power adapter for the cameras in the box all you have to do is the installation, you don't have to buy any other equipment.
Sorry, there was a problem. Please try again later.The electricity is supplied through the BNC cable. So each camera is wired directly to the DVR with the BNC Cable.
Sorry, there was a problem. Please try again later.The kit comes with cables that route video and power both back to the location of the DVR. The cameras will connect directly to the DVR, the power connects to the power supply close to the DVR. I have a UPS running the DVR and cameras. With my setup they will continue to run for 45 minutes after the power goes out.
Sorry, there was a problem. Please try again later.Each camera requires power. The transformer(s) (quantity depends on how many cameras in the kit) that come with the kit provide the correct voltage. The cables for the cameras are specifically made for this application. They have separate power and signal wires.
Sorry, there was a problem. Please try again later.
