“Can the J1772 wired for up to 60 or 48 Amps be easily adjusted for convenient sequential use by both a low amp limit PHEV (RAV4 Prime SE) and high amp capable EV (Tesla Y)?”
Answer This Question
1-5 of 5 Answers
Yes. Ours is wired to 60 and charges at 48a.
Sorry, there was a problem. Please try again later.Yes, this is a feature that you can configure during the set up process. It does ask you what kind of wiring you have.
Sorry, there was a problem. Please try again later.This is a 48 Amp Connector and to operate st 48 Amps it must be connected to a 60 Amp breaker... It will work for the Rav4 and to use with the Tesla you will just need to use the J1772 adaptor that came with the Tesla...
Sorry, there was a problem. Please try again later.The specs say 60amp breaker as the max you should draw on a 60amp circuit is 48amps (or 80% of 60), so if you want 48amps have your electrician put in a 60 amp circuit.
Sorry, there was a problem. Please try again later.The Tesla J1772 Wall Connector is only rated to 48A, not 60A.
Sorry, there was a problem. Please try again later.