“My house is pre set up for surround sound. Can I use my pre wired cables for the rear speakers”
Answer This Question
1-4 of 4 Answers
You should be able to. It just depends on how your terminals are set up. Chances are you have terminals on the wall where your TV is located to send the audio signals to the terminals on the rear wall of the room for the rear surround speakers. If this is the case, you'll want to locate the sub by the TV since this is where the rear surround speakers plug into. From the sub you'll connect your speaker wires to the terminals on the wall for your left and right rear speakers. From the rear wall terminals you will connect to your rear L and R speakers. The speaker connections on the sub and the rear speakers on the Vizio system are RCA. If your wall terminals are the "quick connect" kind that accept bare speaker wire, simply snip the supplied speaker wires leaving an RCA at on end and the bare wires at the other. Only snip enough to get from the sub to the wall terminals and from the wall terminals to your L and R rear speakers so you don't have tons of extra wire to hide. After you snip each wire, you should have 4 speaker wires with an RCA at one end and bare wire at the other. Strip back enough wire on the bare end to insert into your wall terminals for each connection you need to make. The RCA ends go to the sub and the L and R rear speakers respectively. I hope this is helpful.
Sorry, there was a problem. Please try again later.No, you cannot. The rear speakers connect to the wireless subwoofer.
Sorry, there was a problem. Please try again later.Depending on the type of cables used you may still be able to use them however we recommend using the provided speakers and cables.
Sorry, there was a problem. Please try again later.The rear speakers run to the subwoofer. The subwoofer connects wirelessly to the sound bar.
Sorry, there was a problem. Please try again later.