“I have purchased and registered an IS6200 Headset to the CM18445 consol. I am able to answer incoming calls on the headset but can not figure our how to make an outgoing call. Can you please list the steps to make an outgoing call using the heasdset.”
Answer This Question
1-1 of 1 Answer
Dear Mac, to answer your question, the steps will be different based on two assumptions. 1. That you have registered the headset to the main console AND you have linked it to a specific system extension. If this is the case, go to the steps on "Making a call with the cordless headset" at the end of the info below. 2. That you have registered the headset to the main console BUT have not linked it to a specific system extension. If this is the case, follow below steps: De-register the cordless headset: On Console, press "MENU">>"Registration" >> "Deregistration" >> then select the Headset you want to remove >> Press SELECT >> Select "Yes" >> Press SELECT. Register and Link the headset to the extension: 1. Place the headset or speakerphone in the charger and allow it to charge for at least five minutes before beginning registration. Make sure the headset or speakerphone is out of the charger before you begin registration. 2. On the console, press MENU/SELECT. 3. Scroll to Registration, then press MENU/SELECT. 4. Press MENU/SELECT again to select Register Ext. 5. Place the headset or speakerphone in the charger. It may take up to 60 seconds to complete the registration. The console shows HDST/SPK X registered. (X represents the extension number [9-1]) and beeps when the registration is successful. 6. The console shows Link HDST/SPK X to extension?. If you want to link the headset or speakerphone with an extension, scroll to Yes. Otherwise, choose No and then skip to Step 8. Press MENU/SELECT to confirm. 7. Scroll to select a desired extension to be linked with the headset or speakerphone. Press MENU/SELECT to confirm. 8. Lift the headset, then press on the headset; or press PHONE on the speakerphone. If you hear a dial tone, the registration was successful. If you linked the headset or speakerphone with an extension, the extension screen displays the extension number along with the line number it is using. Making a call with the cordless headset: 1. Press the on/off key to turn on the cordless headset. The linked extension display the extension number of the cordless accessory and the line it is using. 2. Enter the phone number on the linked extension. 3. Press the corresponding line key (Line1 to Line4) to dial. 4. Hang up the call on the linked extension. You can now have a private conversation with the external party using the headset. 5. To end the call, press the on/off key on the cordless headset.
Sorry, there was a problem. Please try again later.