“There is a slight tilt upwards after placing my 65'in TV onto the floating swivel mount. How do I correct this tilt so that it is flat or tilting down?”
Answer This Question
1-3 of 3 Answers
The main pivot bolt seems to have some tolerance, allowing the mounted TV to tilt downward. The washers don't have enough friction to hold the TV's weight from tilting. Get a 14mm or 9/16 socket, and a 6mm (I think) allen key. Use them to tighten that pivot bolt and nut. Then gently un-tilt the TV to see if it doesn't droop back down. This was just my problem with a Samsung QN90B 65" which is approximately 55lbs. If your TV is tilting up or down on the pivot bolt, this solution should work either way.
Sorry, there was a problem. Please try again later.There are 2 screws u loosen and it tilts the TV up or down then re tighten they are on each side of swivel mount.
Sorry, there was a problem. Please try again later.Hi Mark, this could be due to using spacers only on the bottom of the monitor brackets; please reach out to our Customer Service department at 1-866-942-5362 to obtain more information and assist you further. We look forward to hearing from you soon!
Sorry, there was a problem. Please try again later.