A:AnswerThank you for sharing your insights with us. We regret that you have had a negative experience with your Whirlpool® Refrigerator ice maker. Please review the following professional troubleshooting tips for this concern:
Ice Maker Status and Reset: Confirm the ice maker is turned on. If it is on but not connected to a water line, it can cause buzzing and over-cooling in the refrigerator/freezer sections. Minor issues may be resolved by locating and pressing the reset button or by performing a power cycle (unplug for one minute). For specific instructions, refer to How to Turn the Ice Maker On (https://producthelp.whirlpool.com/Refrigeration/Full-Size_Refrigerators/Side_By_Side_Refrigerator/Ice_and_Water_Concerns/Ice_and_Dispenser_Concerns/Ice_Production/Not_Making_Ice/Not_Making_Ice_-_Side_by_Side_Refrigerator#s13394). Also, see https://youtu.be/m5oTM6thFig .
Ice Ejection Failure: If the ice maker is producing ice but not ejecting it into the bin, reset the unit by unplugging the refrigerator for one minute. Check for ice production a few hours after the reset.
Door Installation and Connections: For newly installed units, verify that doors are properly installed (consult the Installation Instructions/Owner's Manual). Confirm doors do not rub against adjacent surfaces. Check the water dispenser tube and wiring connections at the bottom of the freezer door hinge per the Installation Instructions.
Temperature Controls: Factory settings are preset to the ""mid setting"" for normal use. Since a warm refrigerator can impact ice production, consider adjusting the controls to a colder setting. Allow at least 24 hours between temperature adjustments for stabilization.
Water Pressure: Optimal water pressure is critical for efficient ice production and dispensing. Low pressure can result in slow dispensing, small/hollow ice cubes, or low/no ice production. Review Ensuring Correct Water Pressure (https://producthelp.whirlpool.com/Refrigeration/Full-Size_Refrigerators/Product_Info/Tips_and_Tricks/Ensuring_Correct_Water_Pressure) for details. Note that reverse osmosis (RO) systems can reduce water pressure further; review Ensuring Correct Water Pressure (https://producthelp.whirlpool.com/) for RO system information.
Water Line Installation: The refrigerator requires a cold water supply using 1/4"" (6.35 mm) O.D. soft copper or PEX tubing, including a service loop. Ensure the water supply line is free of kinks; straighten the line to restore flow and pressure. Avoid pushing the refrigerator too far back against the wall to prevent pinching the line. See https://youtu.be/22Ee78VfBdE.
Water Filter: A clogged or improperly installed filter can restrict water flow, leading to low ice production. The filter should be replaced every 6 months or as needed. Whirlpool recommends everydrop® water filters (https://www.everydropwater.com/). See https://youtu.be/LIP-Za8XnzU.
Filter Flushing: The system must be flushed after every filter change or initial installation to remove excess air and carbon. Air in the system can cause dripping, small/hollow ice cubes, or cloudy water. The required flush volume varies by filter; refer to the filter's instructions. See https://youtu.be/D2W8jNl5PYs.
Please review the troubleshooting tips provided. If the issue persists, we recommend contacting Whirlpool® directly at 800-253-1301 for further assistance. Our representatives are available Monday through Friday from 8:00 AM to 6:00 PM EST.
A:AnswerHello! We are sorry to hear about your concern. We would recommend contacting Whirlpool® at 800-253-1301. We are available M -F 8 am to 6 pm EST. They will be better able to assist you.
A:AnswerHello, thank you for reaching out. We currently do not offer the sound ratings for our Refrigerators, as many variables can cause sounds to differ. Thank you for your inquiry about our Whirlpool appliances.
A:AnswerHello! Model WRMF3636RZ does not have zero clearance doors. The width of the cabinet is 35 5/8" and the width with the doors open 90° is 41". Thank you for your inquiry about our Whirlpool appliances.
A:AnswerHello! We are sorry to hear about your concern. We would recommend contacting Whirlpool® at 800-253-1301. We are available M -F 8 am to 6 pm EST. They will be better able to assist you.
A:AnswerHello! We can only recommend the handles that the Refrigerator is manufactured with. Thank you for your inquiry about our Whirlpool appliances.
A:AnswerHello, we greatly apologize as we currently do not have this model available in 32". Thank you for your inquiry about our Whirlpool appliances.
A:AnswerHello! We are sorry to hear about your concern. We would recommend contacting Whirlpool® at 800-253-1301. We are available M -F 8 am to 6 pm EST. They will be better able to assist you.
