Customer Ratings & Reviews

Works great out of the box, love the multicolor printing. Prints way faster than my old 3d printer turning a 24hr print into a 6hr print. This thing is huge and you can print full size helmets without having to cut into smaller parts. No issues using other brand filament with it. Love the feature where you can have partial roll and when it runs out you can automatically switch to another of the same type. easy to use all of your almost empty rolls.

The K2 Plus Combo handles multi-material prints like a pro. Print quality is outstanding and setup was smoother than expected. The included AMS system is intuitive and works seamlessly. Great value for the features!

I started my 3D printing journey with Creality and never had a problem. I bought a different brand and….. many problems. When Creality came out with this printer I knew I needed to have it. A few reviews were stating machines would come with broken feet and door hinges or dents. I ordered this for pickup so I could record any box damage and prayed everything was good. It was AMAZING! No damage. Prints beautifully! Any problems I HAVE had with mine have been strictly user error. I am only human. lol. I built a shelf for my cfs as I wanted top access as well. Totally recommend this printer!

Fantastic product. Prints perfect right out of the box. Build plate is ginormous!

Excellent printer. You can print straight out of the box, but if you intend on printing miniatures with fine detail you will need to get a 0.2 mm nozzle.

I have owned this machine for about a month now, I picked it up in store so I didn’t have any issues with it being damaged on arrival. So far my experience has been amazing, it worked right out of the box with no tweaking and I have been printing on it for around 10 days of straight print time with minimal tweaking. If your hesitant like I was because it’s creality, just buy it lol it’s not the old Enders anymore, creality has really stepped up the game with this beast.

Overall I have been very happy with my purchase! I always check Best Buy when making bigger purchases like this, because they typically have great deals and their customer service is always top notch. I will say for anyone who purchases one of these printers, Creality has released a ptfe tube holder. This should be the first thing you print and install.

Great 3d printer, did have 2 feet screws broke off looks like over torque issue from factory and glue on bottom hinge of glass door didn't hold, but both easy fixes didn't take away from the machine operating as it should. Easy to set up and get going. 4 stars only on quality due to the feet and hinge.

Works great! Very happy with the printer. Easy to use!

Good large-size printer. Unfortunately, one of the feet came broken, and I had to contact Creality to have them send a new one.

I've been 3D printing for about 3 years now and honestly I've avoided Creality like the plague, as there were always unacceptable issues with their printers, when you visit their forums. On top of that it seemed like everyone who owned one would spend several hundred dollars just to upgrade their $200 printer, when they could have just purchased a $500 printer and had none of the issues. Jump ahead to 2025 and it appeared for awhile, that Bambulab was the only brand raising prices as a result of the tariffs. This simple fact left me with the choice of paying $1749 for an X1C with AMS, no high flow nozzle, no actively heated chamber, and a build volume that matched my P1S in every dimension, or just buying the K2 Plus to see if Creality finally had a high quality printer. I purchased the K2 Plus from Creality about 2 weeks ago, where I had found a notable lack of high profile reviews for the printer, and thus assumed I was getting a larger print volume version of the X1C; spoiler alert, I wasn't... what I was getting was a slightly better, and larger format version of the X1E. When you consider that Bambu wants $2700 for that unit with an AMS. Here are the upgrades over the X1C... 1. Larger build volume (350mm vs 256mm) 2. Actively heated chamber 3. High Flow, Hardened Steel Hot End (this is a $80 upgrade) 4. Linear Rail for the Extruder 5. Higher Hot End Temp (350c vs 300c) 6. Better Filtration The upgrades over the X1E are... 1. High Flow, Hardened Steel Hot End 2. Larger Build Volume (350mm vs 256mm) 3. Higher Hot End Temp (350C vs 320C) BUILD QUALITY If there's one thing that's impressed me the most about this printer, it is the build quality. It has a die cast aluminum frame, linear rail for better stability, glass door and side panels, and a 5mm thick aluminum alloy build plate. It is a solid build and you notice it right out of the box. PERFORMANCE On average, single filament performance is about 25% faster than my upgraded P1S. It gets a lot closers on multi color filament performance but that is largely due to the filament change speed and reduced filament flushing where the P1S is better optimized at this time. PRINT QUALITY The quality of the prints with PLA and PETG from multiple different vendors has been fantastic. There have been no notable issues at all and that's pretty impressive considering I hadn't even made custom profiles for 3rd party filament yet. CMS vs AMS The base AMS appears to have a hygrometer in it, but Bambu hadn't activated it, until they launched the AMS 2 and then it was only visible in the slicer. On top of this you had to print a holder and buy a 3rd party hygrometer to be able to see the humidity levels in that AMS. Even more, the build was more complex, as the AMS required you to remove screws to get at the PTFE tubes should you need to replace them and there was no release option to release the rear PTFE tube without opening the inside. The CMS has open access to the PTFE tubes on the bottom, so you can easily replace those without breaking out tools. There's also a PTFE tube release on the back of the device and that makes it so much easier to deal with there as well. In addition to this, there's. hygrometer and display built into the CMS that can clearly be seen from across the room. One other advantage this has is the fact that the rollers in the CMS are rubber and these allow you to use cardboard spools, without requiring a 3rd party bracket to be printed for the spools. As far as the filament and waste goes, the K2 Plus wastes a whole lot more than the AMS, but given the state of their current software, I see no reason to believe this will not improve over time. SOFTWARE If there's any place I would ding the K2 Plus it would be the Creality Slicer. Although it isn't horrible, it is nowhere near as mature as Bambu Studio at this time. Even more it is a modification of ORCA Slicer (which Bambu Studio is as well), yet they went out of their way to make it look like the inferior CURA slicer. It is functional, even if it takes getting used to and missing some optimizations as well. Another piece of software is the Creality Cloud Mobile App vs Bambu Handy. With the Handy, if you change the nozzle size, you'll run into all kinds of issues tryin to print files from this, as there is no built in slicer for Bambu's mobile app. Creality Cloud Mobile, has a cloud slicer, this is infinitely superior to the Bambu solution, as I can have any size nozzle I want in the printer and start a print from anywhere that I have an internet connection and that's something that has frustrated me about Bambu for months! OVERALL Honestly, this printer has been far more impressive to me, than any other printer I've ever owned and that list includes, Snapmaker, Elegoo, Bambu, and Creality. After looking at the other reviews, it is clear that the biggest issue has been with damage during shipping and the 2nd biggest issue with a coupler that holds the PTFE tube on the extruder (there's a fix for this with a part that prints in under 4 minutes, if I can find the link I'll add it as a comment to this review). So, Creality literally beat Bambu at their own game and this is pretty much superior to just about any single extruder Bambu printer on the market! Yes it literally is that good, assuming it makes it to you in one piece.

This review has just one complaint. It came with a leg broken with the screw broke off in the machine. Easy fix, remove the other 3 and nice, level and stable. Now it was otherwise packed very well. Setup was a breeze, got all things done in the unboxing part, loaded the CFS with 4 colors, did the auto calibrations and printed the little test boat, one color. Then came multi colored and the test boat was perfect along with the 3 color Creality logo and I’m more than impressed with just how perfect it performs. Our new logo is, why buy it when we can just print one, glow in the dark and personalized to boot. Largest print area anywhere and up to 17 colors available to you. OMG even a camera inside you watch on your computer and records it in time lapse. The Creality K2 Plus with the CFS is amazing in every way.

Fast and big!! Solid build, heavy!!! I have about 200 hours in it and havent had a single problem! Love it!!!

Great printer, easy to use right out of the box quality prints every time

This is my first printer ever and it was so seamless to use. Basically plug and play. Build volume is amazing for the price

This thing is a beast. Got it in perfect condition mines some minor marks on glass. Has been printing non stop for 24 hours. Youll need 2 people to get it in place. Its heavy

This beast makes printing in all type of filament a breeze. The bed size makes all the difference. So simple to use no problems so far.

First printer I’ve had. Ran great out of the box. Only one failed print and it was a slicer mistake

There're some quirks, but overall, it's a great printer. Since so many come delivered damaged.... I opted to get it delivered to the STORE vs Fedex or UPS delivering to the house. being on a pallet by a BB associate on the dock vs a dudebro hulking it and breaking it on my porch.. my goal was to get it with no headache. Its heavy. legit. But because of how fast it prints, its needed weight. Had it for a little over 2 weeks now, and I've already clocked 244+hrs of print time on it. Aside from quirks (mainly the slicer and learning a new machine), it's pretty dope.

Best printer ever. pretty cool to make multi color prints. unbox it and load file and print no issues