Customer Ratings & Reviews

Excellent case for those looking for extra build room and superb air flow. The dual chamber is primed for cable management and a clean view from the front. The glass panels are sturdy and if you get it in white, your parts and RGB will be a show stopper. This is my second NZXT case ever and the quality is undeniable. I highly recommend this case.

I built this case around airflow and longevity rather than just looks. My 360mm AIO is mounted in an orientation that keeps air away from the pump, improving long-term reliability and reducing wear. The radiator uses a full push-pull setup for better airflow through the fins, lowering temperatures without needing higher fan speeds. Reverse-blade fans keep every intake looking clean while maintaining proper airflow direction. I also managed to fit two rear exhaust fans instead of the usual one, pulling hot air away from the CPU and VRMs more efficiently. The result is a cooler, quieter, and more reliable system. I love how much room the case has as well as the flexibility as far as mounting. The airflow is wonderful. The only con I could possibly mention of this case is the PSU being mounted behind the CPU, this means you must install your CPU cooler/backplate prior to your PSU.

The airflow was very good and I liked the large size and it was easy to build inside of and I really loved it the build experience and it looks great with my monitor and keyboard.

The case has plenty of space, lots of thought put into the ease of cable management, and installing additional fans was cake.

Great case for massive airflow and cooling gains. Personally found 5-10 degree drop between cpu and gpu when moving from the 2021 h5 flow case owned previously. Very easy case for beginers to build in. Plenty of room due to duel chamber. Massive cooling gains!!!

Fantastic case to build in, would recommend to anyone this case is huge and could handle water loop builds and everything doesn’t look crammed together which I love

Spacious case with it being dual chamber. It's huge, so expect that. There are self retaining thumb screws for the top and two side panels that make removal pretty easy. The mesh panel in front of the 3 stack vertical fans is retained with 1 phillips head screw, and slides right down into place - you can also remove the fan retaining cage from the case with 2x phillips head screws. The front glass uses 3x phillips head screws and slides into place, though you probably won't be taking those off often. The case has room for nearly any configuration you can imagine. Currently, I'm running a side mounted AIO with a push/pull configuration, 3 bank of fans mounted on the top and bottom of the case with an exhaust in the rear. My MOBO is an MATX, so it gives more room, but doesn't even need it, really. Cable management is super easy as well as there is a swing type panel that lets you hide fan controllers, usb extensions, etc. The only thing to watch out for is when using 140mm fans, if you have odd connectors like lian li slide/lock type, you might have to alter the footprint of the connector to get them to fit. I just use 120mm, no headache that way.

A genuinely fantastic case, it's huge but is absolutely worth the price. It comes with 3x140mm stock intake fans and 1x120mm stock exhaust. It has open support on both the top and bottom radiator for up to 3x140mm fans respectively, is a dual chamber meaning cable management and clearance headroom is extremely easy. It's access and latching are also extremely friendly, featuring double take magnetic + non-detachable screws that are incredibly easy to use. If you want a good dual chamber large case for extra fan support or easier cable management, this would be my ultimate recommendation

Amazing airflow, spacious cable management, and easy to create a clean build!

I simply adore this case. It looks great in feature photos and it performs well once setup. I recommend this for those who want to show off elite computers and take seriously the cosmetic look of their PCs. There are plenty of places to hide cables and the cable covers they provide are convenient. It sits upright and if I am placing this in a dangerous place like a rack that's unstable and wobbly, the feet on this case keeps it from tipping over because they are wide. I can sit this case on two poles on my rack and it will not budge and I don't worry about it falling on top of me. I feel great to know that I bought this case and plan to get a 2nd one.

I absolutely love this case. It has so much space and it’s just so easy to work in. Not to mention the airflow is just as you’d expect. I’m running a 9070 xt and a 14900k and I never see high temps. To be fair I use an AIO but even then my GPU stays nice and cool.

I love this case, it’s so easy to build and honestly beautifully BIG! Lot’s of space as well, I already own the H9 Flow previous model in black and will forever love these cases

If you're looking for a case with plenty of space and air flow, this is it. Having the option to install fans on the bottom is a great addition to create more air flow to keep all your parts cool and running efficiently. Has plenty of space to add any GPU you would want to install. Also, being a dual chamber case helps keep all your parts installation a breeze. And cable management is super easy with this case. I would definitely give this case an A+ since it exceeded all my expectations. Specs CPU: AMD 7800X3D GPU: ASUS TUF 5080 OC RAM: G.Skill Trident Z5 32GB MB: ASUS ROG Strix X670E-F PSU: 1300 Watt EVGA AIO CPU Cooler: Cooler Master Atmos 360

The was an excellent purchase. This case exceeded my expectations. This case has plenty of room to install all of my components. I the airFLOW is superb! I use a large cpu cooler the Dark Rock Pro 5 which fit perfectly. The other fans that come with this case are very very quiet as well. I have zero complaints for the case.

This pc case was great, a lot of space, and a lot of supported fans. This case can support up to 9 140mm fans and 1 120mm fan, but it also allows for 10x 120mm fans which also work and look great. I love the space in the back, but you do have to remove some Sata SSD brackets to get the full space. There is included Velcro straps for cable management making my life super easy. There is only 2 bad things about this case, first being not being able to natively support vertically oriented GPUs. You have to buy a $40 adapter from Amazon, but I don’t think it’s a huge deal knowing most people use horizontally oriented GPUs anyway. The other bad thing is the back connect feature. Everything other port works fine, except for the CPU power cutout. It may just be my specific case, but the cables did not work natively, the top of the clip would not fit. I had to cut off the connector piece to make it fit, but I bought a new PSU today so maybe it was just my very specific case. Other than that I love this product and will likely use NZXT cases in the future! (Back connect motherboard not included in photos)

I was a little worried about size originally but when I got it home and set where it would be, it wasn't bad at all. I had to upsize my case due to a few components I wanted to use so I needed something slightly longer and wider but everything went in easy and because of the size it made it easy to install everything

This PC case is by far the best case I’ve ever used to build a PC. I built my dream PC using this one specifically because the ammount of room and how future proof it is. The best part is it looks absolutely amazing and keeps temps super low which i absolutely love. If you plan on building your dream PC, get this case. Trust me it’s absolutely worth it

I went with this case due to a lack of options, but it has grown on me. This case really shows off the components especially if you have RGB fans, cooler, ram. The side behind the motherboard has a ton of room for cable management, places to put fan controllers and extra SSDs. With the size of the new GPUs this case had more than enough room and it was nice not having to fight to find room for parts and places to run cables.

[Employee of bestbuy] Great case. I would definitely recommend if you need a lot of space and want a case that has pre installed cable management.

Large enough to hold all your computer parts and then some. This case provides maximum air flow. Has several fans already and enough space also to add three more.