Rocketfish™ - Universal Soundbar Mounting System - Black

This universal soundbar Mounting kit by Rocketfish, works, But needs some refinement on the way the kit mounts to your television, then to your wall mount. Nevertheless, it works.

So, the Geek Squad tech had never installed this before and seemed it wasn't super easy. But also, when done there's a big gap between the tv and sound bar that just looks weird. See pic

For what I was looking for, this was the only soundbar mounting system I could find. I was able to twist the bars (and speaker attachment plates) so they went under my TV to hold the soundbar in front of it for the Atmos upward firing speakers. But because they are curved, instead of right angles, they go way below the TV. I was able to use velcro strips to hold the power cord and HDMI cable against the rods so it looks decent. I'm glad the rods are long enough to allow me to do what I did. It was easy to assemble and add to the wall hanger.

The mount was fairly easy and straight forward to install. The 2 biggest complaints I have is that 1) it blocks the RCS inputs on my LG 65” tv. I’m guessing that wouldn’t be the case on all models though. 2) once installed the bottom parts of the mount are crooked. I’m currently trying to fix those by tensioning it correctly where it mounts to the soundbar. I have an LG soundbar with mounting holes on the bottom. Soundbars that mount on the rear would probably not be as problematic to address this with.

Took me a good hour to get it installed properly but not without a lot of setbacks. The product works just as it is advertised to be a universal fit but if you are looking for perfection in installation and symmetry this isn't the sound bar mount for you.

This works great, before I just used anchors in the drywall but they have pulled out a few times and my soundbar has fallen. If you have a good tv mount this is awesome, I would use on cheep mounts. This adds the weight of the mount and the soundbar to the TV.

It’s a good bracket. The only issue I had was. When I changed my sound bar from the Bose 500 to the Bose 700. It wouldn’t hold the 700 sound bar, it kept sliding down until it hit the it hit the fireplace mantle. I had to put tape on the two poles to keep them from sliding down.

I purchased this Rocketfish RF-SBM102 Universal Soundbar Mounting System at the same time that I purchased a new Samsung television. I already had a Rocketfish RF-HTVMM170C Full-Motion TV Wall Mount and Samsung HW-R650 Soundbar (purchased in Dec 2019). Geek Squad performed the installation. I could not be more pleased. YOU MUST READ THE INSTRUCTIONS TO GET THIS RIGHT!!! The soundbar mounting system is placed directly against the back of the TV, then the TV mounting brackets are attached using the provided bolts. Spacers are included to make sure it all fits properly (the kit includes an array of bolts and spacers to fit a variety of TVs). The arms of the soundbar mount can be turned to accommodate long or short soundbars. The brackets that attach to the soundbar can be rotated to align with the mounting holes in the soundbar as well. It works with soundbars with screw holes on the back OR on the bottom (like the Samsung). The up/down adjustment allows the soundbar to be placed close to the bottom of the TV with no gap. The Geek Squad team performed a clean installation and it looks great.