
With an ultra-shallow enclosure design and powerful sound output, the R-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound. Features: Optimal sealed cabinet quality Aluminum Dust Cap Neodymium Magnet Alpine Gen2 DD Linear Magnetic Circuit CARB compliant ¾” MDF construction Premium Alpine embroidered black carpet Alpine-branded terminal cup Pre-installed steel mesh grille Includes a 10” R-Shallow Subwoofer (RS-W10D4) Rubber, modular stackable foot design What's in the Box: Sealed Cabinet with (1) 10” R-Series Shallow Subwoofer Mounting Brackets Owner’s Manual Warranty Information Online product registration information Tech Specs: Dimensions: 21.15” W x 5.25” H x 16” L 600W RMS Power Handling Frequency response: 29Hz – 200Hz Dual 4Ω voice coils wired in parallel for a 2Ω load (compatible with S-A60M or R-A75M) Nominal Impedance: 2Ω Voice Coil: 4”(101.6mm) Designed for Tight Spaces Now you don’t have to choose between bass and space! Alpine’s R-Series Shallow Preloaded Subwoofer Enclosure measures at a minimal 5.25” deep to deliver a loud and fun sound in most vehicle applications. Rubber “feet” are adjustable in height to accommodate uneven vehicle floors. Extreme Output Don’t let the size fool you – the enclosures feature the same motor movement (20MM of 1-way excursion) as the full-size R2-Series Subwoofers for extreme output in a shallow woofer design. At the heart of the R-Series Shallow Subwoofers is an oversized 4-inch voice coil that houses the lightweight and powerful neodymium magnet for 600W RMS of power handling.
Q: What is the rms on the subwofer & amp?
A: undefined

With an ultra-shallow enclosure design and powerful sound output, the R-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound. Features: Optimal sealed cabinet quality Aluminum Dust Cap Neodymium Magnet Alpine Gen2 DD Linear Magnetic Circuit CARB compliant ¾” MDF construction Premium Alpine embroidered black carpet Alpine-branded terminal cup Pre-installed steel mesh grille Includes a 10” R-Shallow Subwoofer (RS-W10D4) Rubber, modular stackable foot design What's in the Box: Sealed Cabinet with (1) 10” R-Series Shallow Subwoofer Mounting Brackets Owner’s Manual Warranty Information Online product registration information Tech Specs: Dimensions: 21.15” W x 5.25” H x 16” L 600W RMS Power Handling Frequency response: 29Hz – 200Hz Dual 4Ω voice coils wired in parallel for a 2Ω load (compatible with S-A60M or R-A75M) Nominal Impedance: 2Ω Voice Coil: 4”(101.6mm) Designed for Tight Spaces Now you don’t have to choose between bass and space! Alpine’s R-Series Shallow Preloaded Subwoofer Enclosure measures at a minimal 5.25” deep to deliver a loud and fun sound in most vehicle applications. Rubber “feet” are adjustable in height to accommodate uneven vehicle floors. Extreme Output Don’t let the size fool you – the enclosures feature the same motor movement (20MM of 1-way excursion) as the full-size R2-Series Subwoofers for extreme output in a shallow woofer design. At the heart of the R-Series Shallow Subwoofers is an oversized 4-inch voice coil that houses the lightweight and powerful neodymium magnet for 600W RMS of power handling.

When Kicker created the original Hideaway compact HS8 powered sub, they wanted to make a subwoofer that could fit almost anywhere and still deliver the performance that made Kicker famous. The HS10 sub adds the extra punch of a 10" speaker and a built-in 180-watt amplifier to give you really impressive bass response from a sub that will still fit almost anywhere. With a Kicker 10" woofer, you can expect serious low end, and you can install the HS10 under most seats to bring the bass right up close. The tough all-aluminum chassis and stylish metal grille protect the speaker and deliver great sound. High- and low-level inputs give you plenty of options for hooking up your sub, and the HS10 can accept input signals from 0.25 to 40 volts so it works with almost any vehicle without adding a line output converter.The Hideaway includes an adjustable low-pass crossover, a subsonic filter to improve efficiency, a phase switch, and a variable +6 dB bass boost adjustable with the included remote control bass knob. The HS10 also offers two auto turn-on options. The package includes a wiring harness for power, signal and remote turn-on connections with a quick-connect Molex plug to make installation simple.

From towing to travel, you depend on your truck to get you where you want to go, but can you rely on getting the best performance from your sound system? Now you can add deep, accurate bass in your truck without compromising valuable cabin space with the new R2-DB8V-TRK Dual 8” Alpine Halo R-Series Preloaded Truck Subwoofer Enclosure with ProLink. Designed for trucks, these enclosures were designed to fit under the back seat of most full-size trucks. Two 8” subwoofers are preloaded into the compact enclosure and linked with a ProLink bracket that can be adjusted from 40” to 51” for a wide range of applications. Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine Mono-Power Amplifiers (sold separately)..

Bring your music to life with the Alpine PWV-SB10, a high-performance 10" powered subwoofer built for deep, impactful bass. With a powerful built-in amplifier delivering 400W RMS (200W x 2) and a dual 4-ohm voice coil design, this subwoofer delivers strong, controlled low frequencies with impressive clarity. Engineered with a sealed enclosure and a wide frequency response of 31–200 Hz, the PWV-SB10 ensures tight, distortion-free bass that enhances any genre of music. Fine-tune your sound with a variable low-pass filter (50–200 Hz), phase selector (0°/180°), and a remote level control for on-the-fly adjustments. Whether you're upgrading a factory system or building a custom setup, the PWV-SB10 offers clean, powerful bass and flexible tuning in one sleek package—the perfect blend of Alpine quality and low-end performance. Specifications: Performance Amplifier Power Output RMS Per Channel, Ref.: 4 ohm, 14.4V: 400 W (200 W x 2) Speaker Diaphragm size nominal 10 inch (25 cm) Speaker Impedance Dual Voice Coil 4 Ohm + 4 Ohm Speaker Power Handling RMS/Peak: 200W + 200W/400W + 400W Frequency Response +0/-3dB: 31-200 Hz Enclosure Type: Sealed Control Input Impedance: >10 kOhms Input Sensitivity RCA Input Ref.: Rated Power into 4 Ohms: Hi Level: 0.5 - 10V. Lo level: 0.2 - 2.0V Phase Selector 2 position: 0°/180° Crossover Variable LPF: 50 - 200 Hz (-24 dB/oct.) Remote Level Linear Attenuation 0 to -20dB General Dimensions Width: 470mm (18 1/2") Height: 282 mm (11") Depth without grille: 126 mm (5") Depth including grille: 170 mm (6 3/4") Weight: 9.7 kg (21 lb 6.4 oz)
| Pros for RS-SB10 10" Alpine Halo R-Series "R2" Preloaded Subwoofer Enclosure - Black/Gray | |||
|---|---|---|---|
| There were no pros for this product— | Sound Quality, Bass, Size, Installation Ease | There were no pros for this product— | There were no pros for this product— |
This product doesn't have any reviews yet.