Audio-Technica - AT‑VM95E/BK Dual Moving Magnet Cartridge & Headshell - Black

The AT-VM95E/H combo kit includes the AT-VM95E dual moving magnet cartridge premounted on the AT-HS6BK headshell.FeaturesElliptical Bonded Stylus on an Aluminum CantileverDual Moving Magnet DesignDurable Low-Resonance HosingHigh Output Level (4.0mV)VM95 SeriesThis VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.What's in the BoxAT-VM95E/H Headshell & MM Cartridge Combo KitInstallation HardwareSpecificationsFrequency Response: 20-22000 HzChannel Separation: 20 (dB at 1 kHz)Vertical Tracking Angle: 23°Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)Stylus Construction: Bonded round shankRecommended Load Impedance: 47000 ohmsCoil Impedance: 3.3 k ohms (1 kHz)DC Resistance: 485 ohmsCoil Inductance: 550 mH (1 kHz)Output Voltage: 4.0 mV (1 kHz 5 cm/sec.)Output Channel Balance: 2.0 dB (1 kHz)Stylus Shape: 0.3 x 0.7 mil ellipticalCantilever: Aluminum pipeStatic Compliance: 17 x 10 – 6 cm / dyneDynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)Mounting: Half-inchDimensions (Cartridge & Headshell): 0.84" x 0.83" × 2.46"Model: AT-VM95E/HMounting Feature: H

The Concorde 5E delivers a refined and detailed listening experience making it an ideal choice for those who appreciate high-fidelity sound without unnecessary complexity. Equipped with an elliptical diamond stylus it ensures a premium groove contact reduced distortion and reveals fine nuances in your records.FeaturesNo-Tool InstallationElliptical Diamond StylusImproved Tracking & DetailBalanced And Natural SoundSeamless Stylus Upgrade PathS-Shaped Tonearm CompatibilityA Smart Choice for Vinyl EnthusiastsWhile the Concorde Music series represents Ortofon’s most advanced design the Concorde 5 Series stays true to the classic Concorde MkI legacy offering a proven no-fuss solution for those who want a trusted sound experience at an excellent value. Whether you seek precision and detail or durability and smooth tracking the Concorde 5 Series makes high-quality vinyl playback more accessible than ever - all while preserving the iconic Concorde design that audiophiles and DJs have trusted for decades.Upgrade PathThe Concorde 5 models offer a seamless upgrade path as they are fully compatible with Stylus 5S 5E 10 20 30 and 40. Upgrading the stylus allows you to enhance your listening experience and achieve even higher performance.CompatibilityMounting the Concorde 5 cartridges to your turntable is simple and user-friendly - no additional tools are needed ensuring a smooth setup experience. Its built-in bayonet mount allows seamless compatibility with any S-shaped tonearm.What's in the BoxConcorde 5E Elliptical Stylus Listening CartridgeSpecificationsChannel Balance At 1 kHz: 20 dBFrequency Response 20

Stylus 2M Red Replacement StylusRecommended for the following cartridges:2M RedInterchangeable with 2M BlueNote: Shipped with Stylus protection guard for protection in transit be sure to remove guard after installation.What's in the Box:Stylus 2M Red Replacement StylusSpecificationsFrequency range: 20 - 22000HzFrequency response: 20 - 20000Hz 3/1dBCompliance dynamic lateral: 20μm/mNStylus type: EllipticalStylus tip radius: r/R 8/18μmEquivalent stylus tip mass: 0.5mgTracking force range: 1.6 - 2g (16 - 20mN)Tracking force recommended: 1.8g (18mN)Tracking angle: 20°Recommended for the following cartridges2M RedInterchangeable with 2M Blue