Crown - XLS 1502, Drivecore 2, Two-channel, 525W @ 4Ω Power Amplifier - Black

The XLI Series of power amplifiers from Crown® represents a new era in affordable quality power amplification. All four models in the series are powerful rugged and reliable. They are suited for musicians DJs and entertainers as well as houses of worship discos and pubs. The four models in the series are the XLi800 XLi1500 XLi2500 and XLi3500. They are identical except for output power. Features include RCA and XLR inputs user selectable input sensitivity of 0.755V or 1.4V Speakon® and binding post outputs stereo/parallel/bridge-mono mode power/fault/signal presence/clip indicators forced-air cooling; and protection against shorts no-load on/off thumps and radio-frequency interference. With over six decades of experience designing and building rock-solid products Crown is the standard in amplifier technology.Features2 Channel x 750W Stereo/Parallel/Bridge-Mono ModeUser-Selectable Input SensitivityEfficient Forced-Air CoolingRCA & XLR Inputs; Speakon® & Binding Post OutputsProtection Against Shorts No-Load On/Off ThumpsWhat's in the BoxXLI 2500 2 x 450W Power AmplifierPower CableManualSpecificationsChannels: 24Ω Dual: 750W8Ω Dual: 500W8Ω Bridged: 1500WVoltage Gain: 33 dBFrequency Response: 20 Hz–20 kHz +0/-1 dBTHD: 10 V/µsDamping Factor: >200Signal-to-Noise Ratio: >100 dB A-weightedCrosstalk: -75 dB at 1 kHz; -59 dB at 20 kHzInput Sensitivity: 0.775V or 1.4VInput Impedance: 20 kΩ balanced; 10 kΩ unbalancedDimensions (W x H x D): 19" × 3.5" × 12.4"Weight: 29.7 lbs.

The XLI Series of power amplifiers from Crown® represents a new era in affordable quality power amplification. All four models in the series are powerful rugged and reliable. They are suited for musicians DJs and entertainers as well as houses of worship discos and pubs. The four models in the series are the XLi800 XLi1500 XLi2500 and XLi3500. They are identical except for output power. Features include RCA and XLR inputs user selectable input sensitivity of 0.755V or 1.4V Speakon® and binding post outputs stereo/parallel/bridge-mono mode power/fault/signal presence/clip indicators forced-air cooling; and protection against shorts no-load on/off thumps and radio-frequency interference. With over six decades of experience designing and building rock-solid products Crown is the standard in amplifier technology.Features2 Channel x 300W Stereo/Parallel/Bridge-Mono ModeUser-Selectable Input SensitivityEfficient Forced-Air CoolingRCA & XLR Inputs; Speakon® & Binding Post OutputsProtection Against Shorts No-Load On/Off ThumpsWhat's in the BoxXLI 800 2 x 300W Power AmplifierPower CableManualSpecificationsChannels: 24Ω Dual: 300W8Ω Dual: 200W8Ω Bridged: 600WVoltage Gain: 29 dBFrequency Response: 20 Hz–20 kHz +0/-1 dBTHD: 10 V/µsDamping Factor: >200Signal-to-Noise Ratio: >100 dB A-weightedCrosstalk: -75 dB at 1 kHz; -59 dB at 20 kHzInput Sensitivity: 0.775V or 1.4VInput Impedance: 20 kΩ balanced; 10 kΩ unbalancedDimensions (W x H x D): 19" × 3.5" × 12.4"Weight: 25.1 lbs.

The MP500 V2 is a 2-channel, Multi-Purpose, DSP amplifier with up to 500 watts of power on tap. In 2-channel mode it outputs 125w x 2 at 8 ohms or 225w x 2 at 4 ohms and when in bridged mode it can output up to 500w x 1 at 8 ohms. While MP500 can be used to power nearly any speaker, the selectable onboard DSP presets focus on optimizing all MartinLogan Outdoor products, such as the MartinLogan Outdoor Foundation System, and Custom Installation subwoofers. MartinLogan engineers also went the extra step to make sure that the MP500 V2 could even drive dual subwoofers! The following MartinLogan subwoofers are supported by the MP500 V2’s “Dual Subwoofer” DSP presets to ensure powerful and reliable operation: Dynamo IW-S, Dynamo IW-O (with or without Back Box), Outdoor Living Subwoofer 8. With this and many other features, the MP500 V2 is one of the most versatile custom installation amplifiers on the market!