DS18 Audio - 4-Channel Compact Class D Car Amplifier With Hi-Level Input | 4 x 500W RMS at 4 Ohm - Black
Reviews coming soon
About this product
The NVY-i800.4D is a 4-channel Class D car amplifier from the DS18 NVY series, the brand's high-performance line. It delivers 4 x 500 watts at 4 ohms and 4 x 800 watts at 2 ohms RMS, or 2 x 1100 watts bridged at 4 ohms, with 3200 watts total peak output. Signal-to-noise ratio is rated at 102dB with total harmonic distortion of 0.01 across a 10Hz-31kHz response. A selectable LPF/HPF/FULL crossover covers 40Hz-2kHz. A high-level input with auto turn-on lets the amplifier integrate with a factory head unit without a line output converter. Wiring uses 4 AWG power terminals and a 340A (external) fuse, not included. Match the amplifier to the RMS rating of your speakers and set the gain to that rating for clean, reliable output.
FULL-RANGE POWER
This 4-channel Class D amplifier delivers 4 x 500W at 4 ohms and 4 x 800W at 2 ohms RMS, or 2 x 1100W bridged at 4 ohms, with 3200W total peak output.
CLEAN SIGNAL PATH
Signal-to-noise ratio of 102dB with total harmonic distortion of 0.01 and a damping factor of 200, across a 10Hz-31kHz response. The amplifier reproduces the signal it is given instead of adding noise of its own.
ONBOARD TUNING
A selectable LPF/HPF/FULL crossover covering 40Hz-2kHz. Send each channel only the frequencies it should reproduce without adding an external processor.
HI-LEVEL INPUT WITH AUTO TURN-ON
Accepts speaker-level signal with automatic turn-on, so the amplifier integrates with a factory head unit without a line output converter, through Tiffany RCA terminals for the low-level path.
PROTECTION CIRCUITRY
Built with a cooling fan and thermal, over-load, DC output, short circuit output and voltage input protection, so the amplifier shuts itself down before a wiring fault, a short or overheating can damage it or your speakers.
- Amplifier ClassDNumber Of Channels4Bass BoostNoneBridgeableYesSpeaker-Level InputsYes
Reviews
This product doesn't have any reviews yet.
Compare similar products

The NVY-i800.4D is a 4-channel Class D car amplifier from the DS18 NVY series, the brand's high-performance line. It delivers 4 x 500 watts at 4 ohms and 4 x 800 watts at 2 ohms RMS, or 2 x 1100 watts bridged at 4 ohms, with 3200 watts total peak output. Signal-to-noise ratio is rated at 102dB with total harmonic distortion of 0.01 across a 10Hz-31kHz response. A selectable LPF/HPF/FULL crossover covers 40Hz-2kHz. A high-level input with auto turn-on lets the amplifier integrate with a factory head unit without a line output converter. Wiring uses 4 AWG power terminals and a 340A (external) fuse, not included. Match the amplifier to the RMS rating of your speakers and set the gain to that rating for clean, reliable output.

The NVY-IPX7.4 is a 4-channel Class D car amplifier from the DS18 NVY series, the brand's high-performance line. It delivers 4 x 120 watts at 4 ohms and 4 x 200 watts at 2 ohms RMS, or 2 x 350 watts bridged at 4 ohms, with 1440 watts total peak output. An IPX7 waterproof rating, with UV, salt and fog protection makes it suitable for boats, side-by-sides and powersports vehicles where the amplifier is exposed to water and spray. Signal-to-noise ratio is rated at greater than 90dB with total harmonic distortion of less than 0.1% across a 20Hz-20KHz response. A selectable HPF/FULL/LPF crossover covers 50Hz-4KHz. Wiring uses 8Ga power terminals and a 2 x 30A fuse, not included. Match the amplifier to the RMS rating of your speakers and set the gain to that rating for clean, reliable output.

The NVY-T800.4D is a 4-channel Class D car amplifier from the DS18 NVY series, the brand's high-performance line. It delivers 4 x 200 watts at 4 ohms and 4 x 300 watts at 2 ohms RMS, or 2 x 600 watts bridged at 4 ohms, with 2400 watts total peak output. An IP67 waterproof rating, with UV, salt and fog protection makes it suitable for boats, side-by-sides and powersports vehicles where the amplifier is exposed to water and spray. Signal-to-noise ratio is rated at greater than 80dB with total harmonic distortion of 0.0005 across a 20Hz-20KHz response. A selectable HPF/LPF/FLAT crossover covers 40Hz-3KHz. Match the amplifier to the RMS rating of your speakers and set the gain to that rating for clean, reliable output.

The FX4 is a 4-channel car amplifier from the DS18 FX series, built as a Class D design. It delivers 4 x 180 watts RMS at 4 ohms. Total harmonic distortion is rated at 0.15% with a signal-to-noise ratio of 87dB. A selectable LPF/HPF/FULL crossover covers 40Hz-2KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0~12dB centered between 50Hz. Marine-grade construction makes it suitable for boats, side-by-sides and powersports vehicles. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.





































