DS18 Audio - CARBON 12" High Excursion Carbon Fiber Cone Subwoofer, 3500W RMS Dual 1-Ohm
Reviews coming soon
About this product
The CARBON12.1D is a 12" car subwoofer from the DS18 CARBON series. It handles 3500 watts RMS and uses dual voice coils at 1 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 7000 watts. The high-excursion motor and suspension let the cone travel farther for deeper low-frequency output. The cone is carbon fiber. Mounting requires an 11.15" cutout diameter and 9.75" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.
Woofer Size
12"3500W RMS / 7000W Peak Power Handling
Rated at 3500 watts RMS and 7000 watts peak. Behind that rating: 3.5" voice coil on an aluminum former wound with CCAR wire, a 425 oz ferrite motor and 22.5mm of one-way excursion. The motor is vented for improved heat dissipation, so it holds output during long, high-power sessions.
Dual 1-Ohm Voice Coil
Dual voice coils let you wire multiple subwoofers in series or parallel to reach the final impedance your amplifier is stable at, which gives you room to grow the system later.
High-Excursion Motor for Deep Bass
The high-excursion motor and suspension allow the cone to travel farther than a conventional subwoofer, which moves more air and produces the low frequencies you feel rather than just hear. Give it a properly tuned sealed or ported enclosure to take advantage of it.
Fitment and Recommended Enclosure
This 12" subwoofer requires an 11.15" cutout diameter and 9.75" of mounting depth. DS18 recommends a sealed enclosure of 1.3 cu ft and a ported enclosure of 2 cu ft tuned to 35Hz. Check these numbers against your enclosure before ordering: enclosure volume and tuning change the low-frequency response as much as the driver does.
Carbon Fiber Cone
The carbon fiber cone stays rigid at high excursion while resisting fatigue over time, so the driver keeps its shape and output under sustained high power.
- RMS Power3500 wattsPeak Power Handling7000 wattsImpedance1 ohmsSensitivity82 decibelsDual Voice CoilsYesWoofer Size12"
Reviews
This product doesn't have any reviews yet.
Compare similar products

The CARBON12.1D is a 12" car subwoofer from the DS18 CARBON series. It handles 3500 watts RMS and uses dual voice coils at 1 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 7000 watts. The high-excursion motor and suspension let the cone travel farther for deeper low-frequency output. The cone is carbon fiber. Mounting requires an 11.15" cutout diameter and 9.75" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.

The ZXI12.2D is a 12" car subwoofer from the DS18 ZXI series. It handles 1000 watts RMS and uses dual voice coils at 2 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 2000 watts. The high-excursion motor and suspension let the cone travel farther for deeper low-frequency output. The motor uses a quad stacked magnet assembly. Mounting requires an 11.1" cutout diameter and 7.55" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.

The MTX 12 Inch 2000 Watt Dual Loaded Subwoofer Box Enclosure is meticulously engineered to elevate your audio experience by delivering unparalleled bass performance. This meticulously designed system incorporates two powerful 12-inch Terminator subwoofers within a precisely tuned vented enclosure. The result is an unforgettable auditory journey characterized by deep, resonant bass that adds richness and dimension to your music or audio content. The thoughtful combination of high-quality components ensures that each element of this system, from the durable polypropylene dust caps to the robust 0.625-inch MDF construction, contributes to an immersive and reliable audio experience.Featuring a single terminal cup that reveals a final 2-ohm impedance load, this dual 12-inch subwoofer system seamlessly integrates with any connected amplifier, providing a dynamic and efficient connection. The Terminator subwoofers are equipped with resilient polypropylene dust caps, striking the perfect balance between durability and power efficiency. Transform your car audio experience with the Autotek 1200-Watt 1-Channel Car Audio Amplifier. Designed for powerful, high-quality sound, this Class D amplifier delivers deep bass and crystal-clear highs, making every ride feel like a concert. Whether you're powering subwoofers or speakers, the high-output power supply ensures efficient performance, while the Pro-Fi High-Speed technology minimizes distortion for a clean, rich sound. With a low-noise preamplifier circuit and RCA inputs, you get a pure audio signal with minimal interference, keeping your music crisp and detailed.

The HOOL-X12.1DHE is a 12" car subwoofer from the DS18 HOOL-X series. It handles 4000 watts RMS and uses dual voice coils at 1 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 6000 watts. The high-excursion motor and suspension let the cone travel farther for deeper low-frequency output. Mounting requires an 11.2" cutout diameter and 10.0" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.


















































