DS18 Audio - GEN-X 1-Channel Class D Car Amplifier, 1200W RMS at 1 Ohm - Black
Reviews coming soon
About this product
The G3600.1D is a 1-channel car amplifier from the DS18 G series, built as a Class D design. It delivers 1200 watts RMS at 1 ohms, 900 watts RMS at 2 ohms and 500 watts RMS at 4 ohms. Total harmonic distortion is rated at 0.0014% with a signal-to-noise ratio of greater than 93dB. A selectable Fixed LPF crossover covers 35 - 250 Hz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0 - 9dB centered between 45Hz. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Features
1200W RMS Monoblock Car Amplifier
Delivers 1200 watts RMS at 1 ohms, 900 watts RMS at 2 ohms and 500 watts RMS at 4 ohms. Wire down to the lowest impedance your subwoofer allows to get the full rating, and set the gain to your speaker RMS to keep the signal clean.
Class D Car Amplifier Design
A Class D topology runs cooler and draws less current than a conventional amplifier at the same output, with rated efficiency of 90%. That means less strain on your electrical system and a smaller chassis for the same power.
Adjustable Crossover and Bass Boost
Onboard tuning includes a selectable Fixed LPF crossover covering 35 - 250 Hz and bass boost adjustable from 0 - 9dB centered between 45Hz. Send each channel only the frequencies it should play and dial in the low end without adding an external processor.
Protection Circuitry and Cooling
Built with voltage input, clipping, thermal and dc output protection, so the amplifier shuts itself down before a wiring fault, a short or overheating can damage it or your speakers. That is what keeps 1-channel amplifiers alive in daily-driven vehicles.
0.0014% THD and greater than 93dB Signal-to-Noise
Total harmonic distortion of 0.0014% and a signal-to-noise ratio of greater than 93dB mean the amplifier reproduces the signal it is given instead of adding hiss and distortion of its own, which matters most at high volume.
Specifications
- Amplifier ClassDNumber Of Channels1Bass BoostVariableBridgeableNo
Reviews
This product doesn't have any reviews yet.
Compare similar products

The G3600.1D is a 1-channel car amplifier from the DS18 G series, built as a Class D design. It delivers 1200 watts RMS at 1 ohms, 900 watts RMS at 2 ohms and 500 watts RMS at 4 ohms. Total harmonic distortion is rated at 0.0014% with a signal-to-noise ratio of greater than 93dB. A selectable Fixed LPF crossover covers 35 - 250 Hz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0 - 9dB centered between 45Hz. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.

By the beard of Zeus! Now even mere mortals can harness divine amplification power straight from the lofty, cloud crowned heights of Mount Olympus when wielding the Hifonics Zeus ZXX 2400.1D 2400 Watt Class D Monoblock Amplifier.This high efficiency class D amp has Herculean power in a small footprint. Its PWM MOSFET power supply strikes like lightning, but without extra noise or distortion thanks to its low noise pre amplifier circuitry. The Simpatico dual coil design power supply keeps voltage constant. Meanwhile, use the included remote to crank that bass like the magnificent sound deity you are.With a frequency response of 10Hz 300Hz, variable electronic crossovers, and 2400 watts of max power, the Zeus ZXX 2400.1D will take your car audio to new mythological heights.

The SXE-3000.4D/BK is a 4-channel car amplifier from the DS18 SXE series, built as a Class D design. It delivers 2 x 500 watts RMS at 4 ohms, 4 x 320 watts RMS at 2 ohms and 4 x 200 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 0.05% with a signal-to-noise ratio of 90dB. A selectable HPF/FULL/LPF crossover covers 40HZ-2KHZ, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from NO centered between N/A. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.




















































