Early Black Friday Deals & DoorbustersEnds Nov. 15.Shop now

Skip to contentGo to Product Search
Main Content

DS18 Audio - IXS 10" Shallow-Mount Fiber Glass Cone Subwoofer, 600W RMS Dual 2-Ohm

Model: IXS10.2D
SKU: 13003601
Sold & shipped by

About this product

The IXS10.2D is a 10" car subwoofer from the DS18 IXS series. It handles 600 watts RMS and uses dual voice coils at 2 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 1200 watts. The cone is fiber glass. The shallow-mount basket fits tight spaces and under-seat enclosures where a standard-depth subwoofer will not clear. Mounting requires a 9.25" cutout diameter and 3.66" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.

Features

  • 600W RMS / 1200W Peak Power Handling

    Rated at 600 watts RMS and 1200 watts peak. Behind that rating: 2.5" voice coil on an aluminum former wound with Copper wire and a 62 oz ferrite motor. That is what lets a 10" cone move this much air without losing control.

  • Dual 2-Ohm Voice Coil

    Dual voice coils let you wire multiple subwoofers in series or parallel to reach the final impedance your amplifier is stable at, which gives you room to grow the system later.

  • Fiber Glass Cone

    The fiber glass cone stays rigid at high excursion while resisting fatigue over time, so the driver keeps its shape and output under sustained high power.

  • Fitment and Recommended Enclosure

    This 10" subwoofer requires a 9.25" cutout diameter and 3.66" of mounting depth. DS18 recommends a sealed enclosure of 0.5 cu ft. Check these numbers against your enclosure before ordering: enclosure volume and tuning change the low-frequency response as much as the driver does.

  • Shallow-Mount Design for Tight Spaces

    The shallow mount basket fits under seats, behind seats and in tight factory locations where a standard depth 10" subwoofer will not clear. Confirm your available mounting depth before ordering.

Specifications

  • RMS Power
    600 watts
    Peak Power Handling
    1200 watts
    Impedance
    2 ohms
    Sensitivity
    84 decibels
    Dual Voice Coils
    Yes
    Woofer Size
    10"
Sponsored

Reviews

Rating 1 out of 5 stars with 1 review

1 star rating. 1 review
0% would recommend to a friend

The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.

  • Rated 1 out of 5 stars

    Not what I expected.

    Maybe this just wasn’t the right speaker for the application I intended, but I was not at all happy with the purchase and returned the product. Sound quality was quite poor, and the amount of bass produced was lacking. Also almost sounded like some was loose internally, the speaker had a horrible rattle. All of the other speakers in my truck are DS 18 and they are phenomenal, but the subwoofer just was not it.

    Posted by TIMOTHYW

Compare similar products

DS18 Audio - IXS 10" Shallow-Mount Fiber Glass Cone Subwoofer, 600W RMS Dual 2-Ohm
DS18 Audio - IXS 10" Shallow-Mount Fiber Glass Cone Subwoofer, 600W RMS Dual 2-Ohm
1.0(1)

The IXS10.2D is a 10" car subwoofer from the DS18 IXS series. It handles 600 watts RMS and uses dual voice coils at 2 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 1200 watts. The cone is fiber glass. The shallow-mount basket fits tight spaces and under-seat enclosures where a standard-depth subwoofer will not clear. Mounting requires a 9.25" cutout diameter and 3.66" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.

DS18 Audio - PSW 10" Shallow-Mount Subwoofer, 500W RMS Dual 4-Ohm

The PSW10.4D is a 10" car subwoofer from the DS18 PSW series. It handles 500 watts RMS and uses dual voice coils at 4 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 1000 watts. The water-resistant cone holds up to moisture and spray in open-air installs. The shallow-mount basket fits tight spaces and under-seat enclosures where a standard-depth subwoofer will not clear. Mounting requires a 9.2" cutout diameter and 3.0" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.

JBL - CLUB102SL 10” shallow mount subwoofer w/SSI™ (Selectable Smart Impedance) switch from 2 to 4 ohm - Black

JBL CLUB102SL 10” shallow mount subwoofer w/SSI™ (Selectable Smart Impedance) switch from 2 to 4 ohm

KICKER - L7T 10" 2-Ohm Down-Firing Enclosure Subwoofer - Black
5.0(8)

Elevate your audio experience with the Kicker L7T 10" 500W RMS 2-Ohm Subwoofer in a Down Firing Enclosure. Engineered to deliver deep, thunderous bass in a compact and stylish package, this subwoofer is perfect for anyone looking to enhance their car audio system without sacrificing space. Its innovative down-firing design ensures optimal performance and protection, making it an ideal choice for vehicles with limited space. Built with Kicker's renowned quality and precision, the L7T subwoofer offers a powerful and immersive listening experience, whether you're cruising down the highway or parked at a show.

Pros for DS18 Audio - IXS 10" Shallow-Mount Fiber Glass Cone Subwoofer, 600W RMS Dual 2-Ohm
There were no pros for this product—There were no pros for this product—There were no pros for this product—Bass Quality

Specs

Be the first to ask a question.

We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.

No content
Sponsored