DS18 Audio - SXE 1-Channel Class D Car Amplifier, 500W RMS at 1 Ohm - Black
Reviews coming soon
About this product
The SXE-1500.1D/BK is a 1-channel car amplifier from the DS18 SXE series, built as a Class D design. It delivers 500 watts RMS at 1 ohms, 350 watts RMS at 2 ohms and 200 watts RMS at 4 ohms. Total harmonic distortion is rated at 0.05% with a signal-to-noise ratio of 90dB. A selectable Fixed LPF crossover covers 50-250Hz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between 45Hz. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Color
BlackFeatures
500W RMS Monoblock Car Amplifier
Delivers 500 watts RMS at 1 ohms, 350 watts RMS at 2 ohms and 200 watts RMS at 4 ohms. Wire down to the lowest impedance your subwoofer allows to get the full rating, and set the gain to your speaker RMS to keep the signal clean.
Class D Car Amplifier Design
A Class D topology runs cooler and draws less current than a conventional amplifier at the same output, with rated efficiency of 80%. That means less strain on your electrical system and a smaller chassis for the same power.
Adjustable Crossover and Bass Boost
Onboard tuning includes a selectable Fixed LPF crossover covering 50-250Hz and bass boost adjustable from 0-12dB centered between 45Hz. Send each channel only the frequencies it should play and dial in the low end without adding an external processor.
Protection Circuitry and Cooling
Built with over-load, dc output, short circuit output and clipping protection, so the amplifier shuts itself down before a wiring fault, a short or overheating can damage it or your speakers. That is what keeps 1-channel amplifiers alive in daily-driven vehicles.
0.05% THD and 90dB Signal-to-Noise
Total harmonic distortion of 0.05% and a signal-to-noise ratio of 90dB mean the amplifier reproduces the signal it is given instead of adding hiss and distortion of its own, which matters most at high volume.
Specifications
- Amplifier ClassDNumber Of Channels1Bass BoostVariableBridgeableNo
Reviews
This product doesn't have any reviews yet.
Compare similar products
The SXE-1500.1D/BK is a 1-channel car amplifier from the DS18 SXE series, built as a Class D design. It delivers 500 watts RMS at 1 ohms, 350 watts RMS at 2 ohms and 200 watts RMS at 4 ohms. Total harmonic distortion is rated at 0.05% with a signal-to-noise ratio of 90dB. A selectable Fixed LPF crossover covers 50-250Hz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between 45Hz. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
The SXE-2000.4D/RD is a 4-channel car amplifier from the DS18 SXE series, built as a Class D design. It delivers 2 x 320 watts RMS at 4 ohms, 4 x 160 watts RMS at 2 ohms and 4 x 100 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 0.10% with a signal-to-noise ratio of 90dB. A selectable HPF/FULL/LPF crossover covers 40HZ-2KHZ, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from No centered between No. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
The FRP-2.4K4/BL is a 4-channel car amplifier from the DS18 FRP series, built as a Class D design. It delivers 4 x 250 watts RMS at 4 ohms, 4 x 400 watts RMS at 2 ohms, 4 x 600 watts RMS at 1 ohms, 2 x 750 watts RMS at 2 ohms and 2 x 1000 watts RMS at 1 ohms. Total harmonic distortion is rated at 0.5% with a signal-to-noise ratio of 90dB. A selectable Yes, HPF/FULL/LPF crossover covers 10Hz-2KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between 50Hz. A remote level control is included so you can adjust output from the driver seat. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
The SXE-2500.1D/BK is a 1-channel car amplifier from the DS18 SXE series, built as a Class D design. It delivers 800 watts RMS at 1 ohms, 600 watts RMS at 2 ohms and 300 watts RMS at 4 ohms. Total harmonic distortion is rated at 0,05% with a signal-to-noise ratio of 90dB. A selectable Fixed LPF crossover covers 50-250Hz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0 - 18dB centered between 50Hz. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Customers often buy these together
Kenwood - KAC-531 Class D Digital Mono Amplifier with Variable Low-Pass Crossover and Bass Knob - Silver
$199.99The price was $219.99
More to consider
$244.76The price was $279.95
Enjoy your ride Sponsored
Keep exploring
$153.75The price was $160.18
$249.99The price was $259.99
