DS18 Audio - SXE 4-Channel Class A|B Car Amplifier, 4 x 60W RMS at 4 Ohm - Red
Reviews coming soon
About this product
The SXE-1200.4/RD is a 4-channel car amplifier from the DS18 SXE series, built as a Class A|B design. It delivers 2 x 200 watts RMS at 4 ohms, 4 x 100 watts RMS at 2 ohms and 4 x 60 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 0.05% with a signal-to-noise ratio of 90dB. A selectable HPF/FULL/LPF crossover covers 40HZ-2KHZ, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from / centered between /. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Color
RedFeatures
4 x 60W RMS 4-Channel Amplifier
Delivers 2 x 200 watts RMS at 4 ohms, 4 x 100 watts RMS at 2 ohms and 4 x 60 watts RMS at 4 ohms. Power scales as impedance drops, so check the rating at the impedance you plan to run before matching speakers.
Class A|B Car Amplifier Design
A Class A|B topology runs cooler and draws less current than a conventional amplifier at the same output, with rated efficiency of 64%. That means less strain on your electrical system and a smaller chassis for the same power.
Bridgeable Channels for a Subwoofer
Bridge the channels to combine their output and drive a subwoofer or a pair of higher-power speakers from the same amplifier, which lets one amp cover both your speakers and your bass instead of buying two.
Adjustable Crossover and Bass Boost
Onboard tuning includes a selectable HPF/FULL/LPF crossover covering 40HZ-2KHZ and bass boost adjustable from / centered between /. Send each channel only the frequencies it should play and dial in the low end without adding an external processor.
Protection Circuitry and Cooling
Built with a cooling fan and over-load, dc output, short circuit output and clipping protection, so the amplifier shuts itself down before a wiring fault, a short or overheating can damage it or your speakers. That is what keeps 4-channel amplifiers alive in daily-driven vehicles.
Specifications
- Amplifier ClassABNumber Of Channels4Bass BoostFixedBridgeableYes
Reviews
This product doesn't have any reviews yet.
Compare similar products

The SXE-1200.4/RD is a 4-channel car amplifier from the DS18 SXE series, built as a Class A|B design. It delivers 2 x 200 watts RMS at 4 ohms, 4 x 100 watts RMS at 2 ohms and 4 x 60 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 0.05% with a signal-to-noise ratio of 90dB. A selectable HPF/FULL/LPF crossover covers 40HZ-2KHZ, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from / centered between /. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.

JBL STAGE GT 65W X 4 FULL RANGE AMP

Demand maximum power from your car’s audio system with the Altitude Series 1100W 5-Channel Class D Amplifier from AudioControl. The A1100.5 combines premium engineered audio components and advanced technology to deliver over-the-top power with a sleek and modern aesthetic. Equipped with ParaBASS low frequency contouring, advanced HEXFET power MOSFETs, and new features like Valet Mode, this amplifier guarantees outstanding performance for any vehicle.

The Pioneer GM-DX874 four-channel amplifier delivers 100 watts RMS at 4 ohms to each of your front and rear speakers for powerful music. CTA-2006 compliant, this highly efficient Class D technology provides impressive, high-quality power in a compact chassis. The frequency response extends up to 50,000 Hz, supporting crystal-clear Hi-Res Audio Certified playback. The GM-DX874 uses high-grade electronic components and gold-plated RCA connections to ensure maximum performance. You can configure your amplifier into 3-channel mode (4 ohm loads) to create a strong front soundstage (2x 75 watts RMS) with tight bass from the bridged subwoofer (1x 300 watts RMS). The speaker-level inputs allow you to install this amp in a factory system without RCA connections. Built-in high-pass and low-pass filters let you optimize the sound for your vehicle's interior. A wired bass control remote also lets you easily control the amount of bass from the subwoofer output (SW).
| Pros for DS18 Audio - SXE 4-Channel Class A|B Car Amplifier, 4 x 60W RMS at 4 Ohm - Red | |||
|---|---|---|---|
| There were no pros for this product— | There were no pros for this product— | There were no pros for this product— | Sound Quality, Power, Installation Ease, Size |
| Cons for DS18 Audio - SXE 4-Channel Class A|B Car Amplifier, 4 x 60W RMS at 4 Ohm - Red | |||
| There were no cons for this product— | There were no cons for this product— | There were no cons for this product— | Heat Dissipation |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.




















































