OSD Audio - ACE670 6.5" Angled LCR Trimless In-Ceiling Speaker, 90W (Single) - White
Reviews coming soon
About this product
The OSD Audio ACE670 is a 6.5" angled LCR (left, center, right) trimless in-ceiling speaker that keeps the imaging and staging regular down-firing ceiling speakers lose. Its woofer is fixed at a 15-degree angle to aim sound toward the listening area, and a pivoting tweeter gives you even more control over placement. Use the ACE670 for front left, center and right channels where wall speakers will not work, or as front, rear and side surrounds in a 5.1 or 7.2 home theater. Angled design suits overhead channels in immersive surround formats such as Dolby Atmos®. Because the sound is aimed, you can mount the speakers where the ceiling allows and still get focused sound at the seats. Inside, a sturdy 6.5" carbon fiber composite woofer pairs with a 1" pivoting aluminum dome tweeter. Frequency response is 45Hz - 20kHz, sensitivity is 89 dB and power handling is rated at 90W. A front-mounted contour switch lets you tailor the bass and treble to the room after installation. The woofer uses a butyl rubber surround, which gives deeper bass and a wider frequency response than foam and lasts about twice as long - roughly 25 years compared with 12 to 15. Gold-plated 5-way binding posts give a secure connection to any 8-ohm amplifier or AV receiver. The trimless Architectural Ceiling Element (ACE) design is flush mounted and hardly noticeable. The micro-flange grille is held on by strong magnets and is spray paintable to match the ceiling. Built-in dog-ear brackets make installation quick: cut an 8.12" hole, wire the speaker, set it in place and tighten the front screws. The speaker measures 8.76" in diameter with 4.5" of mounting depth. Sold as a single speaker with a spray-paintable magnetic grille. Passive - an amplifier or receiver is required. Backed by OSD Audio's 10-year warranty.Dolby and Dolby Atmos are registered trademarks of Dolby Laboratories.
Features
Angled for Better Imaging
The 6.5" woofer is fixed at a 15-degree angle to aim sound at your seats, keeping imaging that down-firing ceiling speakers lose. Angled design suits overhead channels in immersive surround formats such as Dolby Atmos®.
Pivoting Tweeter
The 1" pivoting aluminum dome tweeter fine-tunes where the highs go, so dialog and effects stay clear from overhead. Carbon fiber composite woofer, 45Hz - 20kHz, 89 dB sensitivity, 90W handling.
Tune It to the Room
A front-mounted contour switch lets you tailor the bass and treble to the room and your taste after the speaker is installed - no need to pull it back out of the ceiling.
Built to Last
A butyl rubber surround gives deeper bass and wider frequency response, and lasts about twice as long as foam - roughly 25 years versus 12 to 15. Gold-plated 5-way binding posts keep connections secure.
Trimless and Easy to Install
A spray-paintable magnetic micro-flange grille sits flush to the ceiling, and built-in dog-ear brackets lock in from the front. 8.12" cutout, 8.76" diameter, 4.5" depth. Sold as a single speaker.
Specifications
- Speaker TypeIn-Ceiling, Center channel
Reviews
This product doesn't have any reviews yet.
Compare similar products

The OSD Audio ACE670 is a 6.5" angled LCR (left, center, right) trimless in-ceiling speaker that keeps the imaging and staging regular down-firing ceiling speakers lose. Its woofer is fixed at a 15-degree angle to aim sound toward the listening area, and a pivoting tweeter gives you even more control over placement. Use the ACE670 for front left, center and right channels where wall speakers will not work, or as front, rear and side surrounds in a 5.1 or 7.2 home theater. Angled design suits overhead channels in immersive surround formats such as Dolby Atmos®. Because the sound is aimed, you can mount the speakers where the ceiling allows and still get focused sound at the seats. Inside, a sturdy 6.5" carbon fiber composite woofer pairs with a 1" pivoting aluminum dome tweeter. Frequency response is 45Hz - 20kHz, sensitivity is 89 dB and power handling is rated at 90W. A front-mounted contour switch lets you tailor the bass and treble to the room after installation. The woofer uses a butyl rubber surround, which gives deeper bass and a wider frequency response than foam and lasts about twice as long - roughly 25 years compared with 12 to 15. Gold-plated 5-way binding posts give a secure connection to any 8-ohm amplifier or AV receiver. The trimless Architectural Ceiling Element (ACE) design is flush mounted and hardly noticeable. The micro-flange grille is held on by strong magnets and is spray paintable to match the ceiling. Built-in dog-ear brackets make installation quick: cut an 8.12" hole, wire the speaker, set it in place and tighten the front screws. The speaker measures 8.76" in diameter with 4.5" of mounting depth. Sold as a single speaker with a spray-paintable magnetic grille. Passive - an amplifier or receiver is required. Backed by OSD Audio's 10-year warranty.Dolby and Dolby Atmos are registered trademarks of Dolby Laboratories.

Home theatre and surround-sound systems gain heightened realism from these in-ceiling speakers, designed to preserve critical imaging and soundstage detail that gets lost with ordinary designs. The 2-way IC-VT61-W incorporates drivers angled at 30 degrees, allowing optimum front, side and rear-channel placement and performance that turns any room into a fully capable movie and music environment. Keeping our philosophy of delivering high-end sound, the Vertex series of speakers will complement any conventional floorstanding or bookshelf loudspeaker as well. Slim Profile A slim profile paintable magnetic grill allows for the speaker to virtually disappear in the room VERTEX SERIES IN-CEILING SPEAKERS FEATURES Custom Silk-Dome Tweeter Custom silk dome tweeters have been developed for low mass and smooth, extended high frequency response Custom-designed Woofers with Polypropelyne Cone Polypropylene is employed due to its improved internal damping and smooth high frequency roll-off Intricate Crossover A custom multi-element crossover with audio-grade components is implemented to ensure smooth transition between the drivers Specifications: Speaker type: 2-way, rear side open Tweeter: 1-inch soft dome Woofer: 6.5-inch polypropylene cone Crossover frequency: 3,000 Hz Frequency response: 45 to 20,000 Hz Sensitivity: 90 db at 2.83 v/1m Recommended amplifier power: 30 to 120 Watts Nominal/peak power handling: 50/120 Watts Nominal impedance: 6 Ohm Finish: Black baffle/White grille Grille: Metal magnetic / Paintable Accessories included: Cutout template, manual Dimensions (diameter): Diameter 10.4 in / 265 mm Cut-out (diameter): 9.52 in / 242 mm Mounting depth: 6.81 in / 173 mm

The Klipsch CDT-5800-C II maintains the core technology use of a premium 1” Titanium compression driver (tweeter) mated to an exclusive Tractrix Horn combined with a 6.5” Cerametallic woofer in a 2-way design. Now with a new low-profile, more elegant grille and refinements to both high frequency and low frequency reproduction, it continues as a high-performance choice for everything from 2-channel music playback to full, large room surround sound use.

Our flagship centre-channel loudspeaker, the HTM71 S3 features a Carbon Dome drive unit housed in a Tweeter-On-Top enclosure, making it the perfect match for its 705 S3, 703 S3 and 702 S3 stablemates. This approach allows for outstanding integration and an even-more-immersive listening experience across our premium 700 Series-based surround sound systems. The HTM71 S3 also features a 5” Continuum Cone FST midrange driver complete with our Biomimetic Suspension– particularly important for clarity with dialogue. Twin aerofoil profile bass drivers provide create a rock-solid foundation for dynamic performance.
| Pros for OSD Audio - ACE670 6.5" Angled LCR Trimless In-Ceiling Speaker, 90W (Single) - White | |||
|---|---|---|---|
| There were no pros for this product— | There were no pros for this product— | There were no pros for this product— | Sound Quality, Design |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.








































