OSD Audio - PAX50 70V/100V Commercial Amplifier, 50W Class D, Quarter-Rack Width with Mic and Line Inputs - Black
Reviews coming soon
About this product
The PAX50 is a small-format 70V/100V commercial amplifier built for flexible distributed audio system design. Its quarter-rack width and 1U height mean up to four amplifiers fit in a single rack space, so adding power or zones is a matter of adding another unit rather than replacing the rack. Inputs can be shared across multiple amplifiers or kept separate, allowing one source across all zones or a different source in each. The 50W output powers up to eight speakers tapped at 5 watts, and two units can be paired to create a stereo zone where left and right separation matters. Connections include two line inputs (RCA stereo summed to mono and 3.5mm stereo) plus a balanced quarter-inch microphone input with volume control, a 3.5mm line-level pre out and a Phoenix connector speaker output. Independent gain knobs for each line input and a front-panel master volume handle setup. Signal sensing turns the amplifier on automatically with a 3-second delay and shuts it down after 3 minutes of silence.
Features
Four Amplifiers Fit One Rack Space
At 6.24 by 10.09 by 1.9 inches, the quarter-rack chassis lets up to four PAX50 units occupy a single rack space using the optional mount kit. Systems grow by adding amplifiers rather than replacing them, which keeps upgrade costs low and rack real estate under control in tight equipment closets.
70V/100V Output for Eight Speakers
A rear-panel switch selects 70V or 100V constant-voltage operation, with 50 watts of output powering up to eight speakers tapped at 5 watts each. Output modes are rated at 70V and 100V plus or minus 3V at 1kHz with 1% THD, suiting retail, office and hospitality distributed audio.
Shared or Independent Source per Zone
Inputs can be shared with additional amplifiers or kept separate for each unit. That means a multi-zone system can run one source everywhere or a different source in each zone, and two PAX50 units can pair to create a stereo zone where left and right separation is needed.
Line, 3.5mm and Balanced Mic Inputs
Line 1 accepts RCA stereo summed to mono, Line 2 accepts 3.5mm stereo, and a balanced quarter-inch microphone input with its own volume control supports paging (an external preamp is required). A 3.5mm line-level pre out feeds additional equipment, and independent gain knobs set each line input.
Auto Signal Sensing and Cool Class D Design
Signal sensing powers the amplifier on with a 3-second delay and shuts it down after 3 minutes of silence. Class D amplification runs cool for rack mounting or restricted ventilation and uses a fraction of the electricity of Class AB designs. Metal chassis, RoHS2, FCC, CE and plenum rated, 2-year warranty.
Specifications
- Continuous Watts x Channel @ Ohms50W x 1 @ 70V; 50W x 1 @ 100VNumber of Channels1Number of Audio Zones1Network Connector(s)No network connectors
Reviews
This product doesn't have any reviews yet.
Compare similar products

The PAX50 is a small-format 70V/100V commercial amplifier built for flexible distributed audio system design. Its quarter-rack width and 1U height mean up to four amplifiers fit in a single rack space, so adding power or zones is a matter of adding another unit rather than replacing the rack. Inputs can be shared across multiple amplifiers or kept separate, allowing one source across all zones or a different source in each. The 50W output powers up to eight speakers tapped at 5 watts, and two units can be paired to create a stereo zone where left and right separation matters. Connections include two line inputs (RCA stereo summed to mono and 3.5mm stereo) plus a balanced quarter-inch microphone input with volume control, a 3.5mm line-level pre out and a Phoenix connector speaker output. Independent gain knobs for each line input and a front-panel master volume handle setup. Signal sensing turns the amplifier on automatically with a 3-second delay and shuts it down after 3 minutes of silence.

This amp is the workhorse of the Dayton Audio commercial amplifier line-up! With 120 watts of power, high or low impedance output, and an easy-to-use design, all wrapped up in a sleek 2RU chassis, the DA120R from Dayton Audio is the perfect commercial mixer amplifier solution for many installs or expansions. You can count on Dayton audio amps to deliver great performance day in and day out!

This 60 watt power amplifier provides the juice you need for your 25 V or 70 V PA speaker. Connect up two mics using the rear terminals plus an auxiliary RCA input. Each input has an independent gain control and you can also adjust the tone of the sound using the rotary treble and bass faders. Connect your speakers using the rear terminals. This unit is also equipped with an unswitched 500W max grounded power outlet on the back. Also capable of music-on-hold. Includes a replaceable fuse and detachable AC power input. Runs on 110 or 220 V. DETAILSFeatures: Built-in Bluetooth for Wireless Audio Streaming Digital LED Display with FM Radio USB Flash Drive & SD Memory Card Readers Power On/Off Switch & LED Indicator MIC 1 Output Level Control MIC 2/AUX Output Level Control Bass and Treble Tone Controls AUX RCA Input MIC 2/AUX Input Selector Switch MIC 1/MIC 2 Terminals (MIC 1 Auto Talkover) Mute Terminals Detachable AC Power Input Replaceable Fuse Monitor 600-Ohm 1V Terminals (Music On Hold) Monitor 1W 8-Ohm Terminals (Music On Hold) Monitor Output Level Control (Music On Hold) TEL/PAGING Terminals Paging Output Level Control MIC/TEL VOX Level Control (Internal) Bluetooth Connectivity: Works with All of Your Favorite Bluetooth Devices (iPhones Androids Smartphones iPad Tablet PC etc.) Bluetooth Network Name: ‘PYLEUSA’ Bluetooth Version: 5.0 Wireless Range up to 30’+ ft. What’s In The Box: PA Amplifier FM Antenna Remote Control Technical Specs: MAX Power Output: 500 Watt AC Outlet Construction Material: Iron Bass/Treble: +/-10dB 100-10kHz Frequency Response: 50-15kHz Attenuation (Mic): 61dB T.H.D.: Speaker Terminals (COM/4-ohm/8-Ohm/16-Ohm/25V/70V) Battery Operated Remote Requires (1) x CR-2025 Button Cell Battery Included Power: 120/240 Voltage Selector Dimensions (W x H x D): 10.7 x 8.9 x 3.46 inchesWhats In The BoxPA Amplifier FM Antenna Remote ControlSpecificationThis 60 watt power amplifier provides the juice you need for your 25 V or 70 V PA speaker. Connect up two mics using the rear terminals plus an auxiliary RCA input. Each input has an independent gain control and you can also adjust the tone of the sound using the rotary treble and bass faders. Connect your speakers using the rear terminals. This unit is also equipped with an unswitched 500W max grounded power outlet on the back. Also capable of music-on-hold. Includes a replaceable fuse and detachable AC power input. Runs on 110 or 220 V.

The Pyle 9” Class D Mosfet Amplifier is a 1-channel monoblock amp that packs 1000 watts of peak power for powerful and distortion-free audio. Part of the Invincible Series, it features a Mosfet PWM power supply, providing efficient, high-performance amplification for a wide range of audio systems. Ideal for compact setups or as part of a larger system, this amplifier delivers crisp, clear audio with deep, rich bass, perfect for both casual and professional listeners.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.






















































