OSD Audio - Series 300W Mono Class A/B Subwoofer Amplifier with Selectable Bass Boost and LFE Input - Black
Reviews coming soon
About this product
The Black Series BK-SAM300 is a mono Class A/B subwoofer amplifier that supplies up to 300W to passive subwoofers, including in-wall models that require external power. Output is rated at 230W RMS and 460W peak into 4 ohms, or 156W RMS and 310W peak into 8 ohms, providing stable power for low-frequency effects in home theater systems. Unlike Class D designs, the Class A/B output stage delivers solid, well-defined bass with a natural character many listeners prefer for music. Low-level, high-level and LFE inputs cover every source type, and manual, auto or triggered on/off modes allow integration into automated systems. Selectable bass boost adds up to 12dB of gain between 25Hz and 50Hz to reinforce the bottom octave. Adjustable phase, gain and crossover controls with a 35Hz to 160Hz variable crossover and 40Hz to 180Hz low-pass adjustment let you tune output to the room. Pop-out adjustment knobs keep settings from being disturbed. The heavy-duty steel chassis carries a brushed aluminum faceplate.
Class A/B Output for Well-Defined Bass
A mono Class A/B output stage delivers 230W RMS and 460W peak into 4 ohms, or 156W RMS and 310W peak into 8 ohms. The Class A/B topology produces solid, well-defined low-frequency output with a natural character that many listeners prefer over switching designs for music-focused systems.
Selectable Bass Boost up to 12dB
Bass boost adds up to 12dB of gain at a selectable point between 25Hz and 50Hz, reinforcing the bottom octave where many rooms and subwoofers lose output. This recovers the deep extension that gives movie soundtracks physical impact without turning up the overall subwoofer level.
Low-Level, High-Level and LFE Inputs
Three input types cover every source: low-level RCA for modern pre-amplified sources, high-level speaker connections for receivers without a subwoofer output, and a dedicated LFE input for AV receivers with a discrete low-frequency effects channel. One amplifier fits new and legacy systems alike.
Adjustable Phase, Gain and Crossover
Variable crossover from 35Hz to 160Hz, low-pass adjustment from 40Hz to 180Hz and phase control from 0 to 180 degrees let you match the subwoofer to the main speakers and the room. Pop-out adjustment knobs recess into the panel so settings are not disturbed once dialed in.
Steel Chassis, Multi-Voltage, Low Standby Draw
A heavy-duty steel chassis with brushed aluminum faceplate measures 17.25 by 3.75 by 13.88 inches and weighs 16 pounds. Manual, auto and triggered on/off modes suit automated systems, standby draw stays under 1 watt, and the input voltage switches between 120V and 240V. 2-year warranty.
- Continuous Watts x Channel @ Ohms230W x 1 @ 4 Ohms; 156W x 1 @ 8 OhmsNumber of Channels1Number of Audio Zones1Network Connector(s)No network connectors
Reviews
This product doesn't have any reviews yet.
Compare similar products
The Black Series BK-SAM300 is a mono Class A/B subwoofer amplifier that supplies up to 300W to passive subwoofers, including in-wall models that require external power. Output is rated at 230W RMS and 460W peak into 4 ohms, or 156W RMS and 310W peak into 8 ohms, providing stable power for low-frequency effects in home theater systems. Unlike Class D designs, the Class A/B output stage delivers solid, well-defined bass with a natural character many listeners prefer for music. Low-level, high-level and LFE inputs cover every source type, and manual, auto or triggered on/off modes allow integration into automated systems. Selectable bass boost adds up to 12dB of gain between 25Hz and 50Hz to reinforce the bottom octave. Adjustable phase, gain and crossover controls with a 35Hz to 160Hz variable crossover and 40Hz to 180Hz low-pass adjustment let you tune output to the room. Pop-out adjustment knobs keep settings from being disturbed. The heavy-duty steel chassis carries a brushed aluminum faceplate.
The SMP300 is a Class D mono subwoofer amplifier delivering up to 500W peak power at 4 ohms and 250W continuous RMS, built for passive subwoofers such as in-wall models that require external power. At only 3 inches high it fits inside any equipment rack or cabinet and includes 1U rack mounting hardware. A front-panel variable low-pass filter adjusts from 35Hz to 180Hz to control the overlap between the subwoofer and main speakers, while variable phase control from 0 to 180 degrees fine-tunes alignment so bass reinforces rather than cancels. Front-panel volume completes the setup controls. Multiple connection options include LFE input plus line-level and speaker-level inputs, covering both newer receivers and older source equipment. Auto-sensing shuts the amplifier down when no signal is detected, and the power supply is switchable between 120V and 230V. Frequency response spans 20Hz to 160Hz within 1dB with a 95dB signal-to-noise ratio. ETL and CE certified with a 2-year warranty.
The SMP200 is a compact Class D mono subwoofer amplifier built to power passive subwoofers in home theater and whole-house audio systems. It supplies 120W RMS at 8 ohms with 240W peak, or 200W RMS at 4 ohms with 400W peak, giving in-wall and stand-alone passive subs the power they need for low-frequency impact on movie and music soundtracks. An advanced crossover circuit adjusts from 35Hz to 160Hz using the front-panel control knob, with additional front-panel phase and volume controls to dial in the right amount of low-frequency effect for the room. Inputs accept either speaker-level or line-level RCA connections, so the amplifier works with both modern receivers and older source equipment. Auto-sensing turns the amplifier on when a signal is detected and off when it is not, and a 12V trigger mode supports integration with automated systems. The chassis measures 8.5 by 1.75 by 9.8 inches and weighs 6.7 pounds, fitting easily into a rack or cabinet.
Take your car audio system to the next level with the NVX XQA6001 600W RMS X-Series SQ Class D Monoblock Amplifier. Engineered for high-resolution sound quality, this compact amplifier delivers a total RMS power of 600 watts, providing robust and distortion-free bass performance. Its innovative X-Boost circuitry enhances low-frequency response, compensating for bass roll-off to ensure deeper, richer sound. With a wide frequency range of 10Hz to 250Hz, adjustable phase control, and precise filtering options (low-pass and subsonic), the XQA6001 offers unmatched customization to fine-tune your listening experience. Built for reliability and ease of use, this monoblock amp features 4-way protection circuitry, signal-sensing remote turn-on, and high-quality Tiffany-style RCA inputs/outputs. LED indicators keep you informed of Power, Protect, Clip, and X-Boost status, while the included wired bass level remote lets you control your bass on the fly. Compact yet powerful, the NVX XQA6001 is the perfect solution for audiophiles seeking premium bass performance in a durable and space-saving design.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
