Fosmon Ultrasonic Jewelry Cleaner Keeps Your Valuables Looking Like the Day You Bought Them. Fosmon's ultrasonic jewelry cleaner uses only water and its ultrasonic waves to gently remove dirt and grime in a short amount of time without using harsh chemicals. Clean everything from necklaces to watches, to coins. Have Your Jewelry Sparkling In No Time. The ultrasonic cleaner provides you with 18 preset timer settings to personalize the cleaning cycle based on what you are cleaning. You can have your items clean in as little 90 seconds or 30 minutes for the items that may have years of buildup. You Can Clean Almost Anything. If you have necklaces earrings, rings, bracelets, waterproof watches, personal care items, or small utensils, you can clean them all with the easy to handle basket and watch stand, included with the ultrasonic cleaner. Simple to Operate, Simple to Read. The ultrasonic cleaner is built with a simple 3 button design, and an easy to read timer. Push the time button until your timer setting appears. If you go beyond your desired time, simply push the reset button, allowing you to reset the time. When you're done with cleaning, press the on/off button, leaving the ultrasonic cleaner ready for the next wash. Plenty of Room For All Your Items. The ultrasonic cleaner has a stainless steel tank that holds 20oz (600 mL) of water, and with interior dimensions of 155x95x52mm (6.1x3.7x2.1in), allowing you to fit most small items. Specifications. Overall Size: 8.1x6x5.2in (206x152x132mm). Tank Size: 6.1x3.7x2.1in (155x95x52mm). Tank Capacity: 20oz / 600ml. Power: 100-120VAC 35 watts. Frequency: 42 KHz. Cycle Times: 18. Timer Settings: (90sec to 30min). Weight: 1lb 13oz (833g). Conforms with PSE. Package Includes. Ultrasonic Cleaner x1. Plastic Basket x1. Plastic Watch Stand x1. Instruction Manual x1. Model: 51028HOM.

The 2M Series of cartridges is designed for precise and accurate retrieval of the information in the record groove. Ortofon's philosophy is to play the record sound as accurate as possible without coloring the sound.The name 2M was selected from several ideas. Ortofon wanted a modern name that would be easy to pronounce and remember and therefore an alphanumerical name was chosen. 2M means MM which is the abbreviation for moving magnet. The 2M series of cartridges features Ortofon’s trademark split pole pins an invention that enables moving magnet cartridges to have a flat frequency response as with a moving coil cartridge. Split pole pins were invented by Ortofon and were originally presented in the 500 series and Super OM series.   We have optimized the design for ease of mounting the cartridge and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.2M Blue Series Features:an improved engine which provides an increased output of 5.5mVNude Elliptical diamond and split pole pins with a copper wire2M Blue Series Specifications:Output voltage at 1000 Hz 5cm/sec: 5mVChannel balance at 1kHz: 15 dBChannel separation at 1 kHz: 25 dBChannel separation at 15 kHz: 15 dBFrequency range at - 3 dB: 20-25.000 HzFrequency response: 20-20.000 + 2 / - 1 dBTracking ability at 315Hz at recommended tracking force: 80 micrometersCompliance dynamic lateral: 20 micrometers/mNStylus type: Nude EllipticalStylus tip radius: r/R 8/18 micrometersTracking force range: 16-20g (16-20 mN)Tracking force recommended: 18 g (18 mN)Tracking angle: 20 degreesInternal impedance DC resistance: 13 kOhmInternal inductance: 700 mHRecommended load resistance: 47 kOhmRecommended load capacitance: 150-300 pFCartridge colour body/stylus: Black/BlueCartridge weight: 72gReplacement stylus unit: 2M Blue (interchangeable with 2M

This elliptical bonded stylus makes it easy to upgrade the sound quality of any turntable equipped with an ATN3600L or ATN3600LC conical stylus, such as the turntables in our popular AT-LP60X series. Modeled after the venerable ATN3600L, which has sold by the millions and been trusted by countless music lovers for more than 50 years, the ATN3600LE features a 0.3 x 0.7 elliptical stylus for enhanced sound quality while remaining reliable and easy to use. Audio-Technica has been perfecting the art of transducer technology since our first handcrafted phono cartridge in 1962.